Sea Pro 2400 SV Center Console Boat Cover & Canvas

Sea Pro 2400 SV Specifications

  • Builder: Sea Pro Boats, Newberry, South Carolina
  • Type: Center console bay boat (SV series), single outboard
  • Length: 23'8" (listed as 24')
  • Beam: 8'6"
  • Hull: Fiberglass modified-V
  • Displacement: About 2,200 lb (dealer figure)
  • Power: Single outboard, 225–250 hp in listed examples
  • Status: No longer built
  • Cover Shipping Weight: 32 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and windshield and covering the leaning post, cockpit and outboard cowling
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 32 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Sea Pro 2400 SV center console bay boat (listed by dealers as the SV2400CC Bay Boat) with no T-top: 23'8" with an 8'6" beam. Please confirm your model and year when you order so we can check the pattern before we cut; if you aren't sure, check the model name and length on your registration or hull paperwork.
Order our Sea Pro 2400 SV Bay T-Top cover. It's the same 2400 SV, cut to fit up under the T-top and around its legs. This full cover goes over the whole boat, console included, and isn't made to fit around a top's frame.
Yes. The leaning post sits under the cover with the console, and the fabric runs from the console peak back over the post and the cockpit. Pull any rods out of its holders first so they don't push up through the fabric.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $1,085.00  ·  Sunbrella $1,275.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sea Pro 2400 SV Center Console Boat Cover — Custom-Fit for the Sea Pro 2400 SV Bay Boat

Sea Pro Boats built the 2400 SV in Newberry, South Carolina, as the largest of its SV-series center console bay boats, through the mid-to-late 2000s; dealers list it as the SV2400CC Bay Boat. Sea Pro’s lineup gave its length as 23’8″, and dealer listings round it to 24 feet with an 8’6″ beam and a fiberglass modified-V hull; one listing shows about 2,200 lb of displacement. Used examples usually carry a single outboard of 225 to 250 hp. Listings describe an open fishing layout with walk-around room at the console, a leaning post at the helm, multiple livewells, plenty of storage and a bow that takes a trolling motor. This Center Console cover is patterned for the Sea Pro 2400 SV without a T-top, and like all of our Sea Pro boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the Sea Pro 2400 SV

The cover peaks over the console and windshield and slopes down to the gunwales on both sides, so rain runs off instead of pooling in the cockpit. Forward, it runs across the bow deck to the stem; through the middle it takes in the console and the leaning post behind it, falling to the rubrail along the 8’6″ beam. Aft, it covers the cockpit and livewells and falls as one loose drape over the outboard cowling, with the lower unit exposed. Pull any rods out of the leaning post holders first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Center Console or Bay T-Top?

We list two covers for this hull. This one is the full-boat Center Console style for a 2400 SV with no top. If your boat has a T-top, as many do, order our 2400 SV Bay T-Top cover instead, which fits up under the top and around its legs.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a 2400 SV with a T-top, see our Sea Pro 2400 SV Bay T-Top cover; for the 21-foot SV without a top, see the Sea Pro 2100 SV Center Console cover.

Sign up for updates and information about our business