7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
26 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It is for the East Cape 18 — East Cape's 18 EVO (X or V), which the factory lists at 17'9" long with a 6'7" beam. If you are not sure which East Cape you own, check the hull ID or contact us with your model name before ordering.
The Lostmen has its own pattern — order our East Cape 18 Lostmen cover for that boat. The Fury is a different hull again, so contact us before ordering for a Fury.
The 18 EVO comes with a side console as standard, with center and flush-mount consoles optional. The cover peaks over the console, so let us know your console position when you order and we will confirm the fit.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$835.00 · Sunbrella$985.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
East Cape 18 Center Console Boat Cover — Custom-Fit for the 18 EVO Skiff
When an East Cape is listed simply as an “18,” it is usually the 18 EVO — the 18-foot member of East Cape’s current EVO line, built one at a time in Longwood, Florida, and offered as the flat-bottom 18 EVO X (2° deadrise) or the 18 EVO V (12°). East Cape lists both at 17’9″ long with a 6’7″ beam. The X drafts 4″–7″ with 60–90 hp and a 23-gallon tank; the V drafts 7″–9″ with 90–115 hp and a 26-gallon tank and is aimed at backcountry inshore water with calm-day offshore ability. Both have an infused, cored vinylester hull, a full-width bow casting deck with nothing underfoot, front and rear storage hatches, and a side console as standard, with center and flush-mount consoles available. This center console cover is patterned for the East Cape 18 with its console, and like all of our East Cape boat covers, it’s cut to this hull rather than a generic 18-foot size chart.
How It Fits the East Cape 18
The cover peaks over the console and slopes down to the gunwales, laying flat across the full-width casting deck and rear hatch so water sheds over the sides instead of pooling on the low decks. At the transom it wraps the outboard in the same piece, so the motor and transom are covered without a separate hood. With a 6’7″ beam the 18 is noticeably roomier than East Cape’s 17-series skiffs, and the pattern is cut to that width rather than stretched from a smaller cover. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Not the Same as the 18 Lostmen
East Cape’s retired Lostmen and Fury hulls are also about 18 feet, but they are different boats. If you own a Lostmen, use our East Cape 18 Lostmen cover instead.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Looking at a smaller East Cape? See our East Cape 17 EVO X cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.