7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
26 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Center Console is our name for the full-coverage style made for boats without a T-top or hardtop: it covers the whole boat from bow to stern and rubrail to rubrail, windshield and outboard included. If your 188 LE has a T-top, order the EdgeWater 188 T-Top cover instead — that style fits up under the top.
Both fit the same 18'8" by 7'9" hull, but the 188 LE is cut from its own pattern. Order the one that matches your boat's badge or paperwork; if you can't tell, send us a photo and we'll check.
The 188 has been built since the 2007 model year. Tell us your year and your bow rail height when ordering so we can confirm the fit for your LE.
No. The cover drapes over the leaning post, cooler seat and bow rail. Pull rods from the holders and trim the motor down before covering.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$835.00 · Sunbrella$985.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Edgewater 188 LE Center Console Boat Cover — Custom-Fit for the EdgeWater 188 LE
The 188 LE is a version of EdgeWater Power Boats’ 188, the 18’8″ console fishing boat the Edgewater, Florida, builder has offered since the 2007 model year. We keep a separate pattern for boats badged LE, so this cover isn’t simply our standard 188 cover under another name. The 188 platform it’s built on has a 7’9″ beam, 13 inches of draft, a 150 hp rating and seating for seven; factory spec sheets give about 2,050 lb for the bare boat and 43 gallons of fuel on recent models, with a 54-gallon tank listed for 2010. Standard 188 equipment that shapes the cover includes a console with a 3/8″ acrylic windshield and grab rail, a 54-quart cooler seat with backrest, a leaning post with rod holders, transom quarter seats, gunwale rod holders and a welded 1″ stainless bow rail. This full cover is patterned for the 188 LE without a top, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 19-foot size chart.
How It Fits the EdgeWater 188 LE
The cover peaks over the console windshield and grab rail, slopes forward over the cooler seat, bow and rail and aft over the leaning post and quarter seats to the rubrail, so water runs off the sides instead of pooling in the cockpit. It continues past the transom to wrap the outboard in one piece. Trim the outboard all the way down before covering — the pattern is cut to fit best that way — and remove a bow-mount trolling motor if you run one. Pull rods from the holders before covering. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
LE or Standard 188?
EdgeWater’s published 188 specifications don’t spell out what changed on LE boats, so go by the badge or paperwork on your boat. If it says LE, this is your cover. If it doesn’t, order our EdgeWater 188 cover. Not sure? Send us a photo of the console and bow, and tell us your year and bow rail height, and we’ll confirm before your cover is cut. If your boat has a T-top, you need our EdgeWater 188 T-Top cover.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the earlier 18-footer, see the EdgeWater 185 cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.