Parker 23 SE Center Console Boat Cover & Canvas

Parker 23 SE Specifications

  • Builder: Parker Boats (Beaufort, NC)
  • Also Listed As: 2300 SE / 2300 Special Edition
  • Length: 23' hull; 25' overall (factory)
  • Beam: 8'6"
  • Draft: About 10"
  • Deadrise: 14°–16° (by year)
  • Dry Weight: About 2,750 lb (factory; later sheets list more)
  • Fuel: About 98 gal (factory)
  • Max Power: Single outboard, up to 250 hp
  • Cover Shipping Weight: 33 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover that peaks over the console and slopes to the gunwales, covering the bow, leaning post, livewell, jump seats and outboard cowling
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Parker 23 SE (23 Special Edition, earlier listed as the 2300 SE) — 8'6" beam — with no T-top or hardtop. Parker updated this boat over the years, so please confirm your model year and setup when you order so we can check the pattern before we cut.
This Center Console cover is for an SE with no top: it covers the whole boat and peaks over the console. If your boat has a T-top or hardtop, order the 2300 SE T-Top cover, which fits up under the top and wraps its supports.
Parker's 23-foot boats come in two quite different hulls. The 2300 DV is the deep-V model, with about 21 degrees of deadrise at the transom, a full transom with an engine bracket and transom door, and a console with a head. The 2300 SE (Special Edition) is a modified-V with about 14 degrees of deadrise and a notched transom, and it is lighter and draws less water. This cover is cut for the SE only.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $1,015.00  ·  Sunbrella $1,195.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Parker 23 SE Center Console Boat Cover — Custom-Fit for the Parker 23 Special Edition

Parker Boats builds its fiberglass fishing boats in Beaufort, North Carolina, an area known for more than two centuries of hand-built boats. The 2300 SE (2300 Special Edition, later listed as the 23 Special Edition) is Parker’s modified-V 23-footer. Factory specs give a 23′ hull at 25′ overall, an 8’6″ beam, about 10 inches of draft, 14 degrees of deadrise and a dry weight of about 2,750 lb, with 98 gallons of fuel and up to 250 hp; later dealer spec sheets list a heavier boat with more fuel and 16 degrees, so figures vary by year. Standard gear includes a leaning post with rocket launchers, a 30-gallon above-deck livewell, stern jump seats with hinged lids and cushions, a foredeck anchor locker, under-gunwale rod storage and a three-step boarding ladder over a self-bailing cockpit; a forward platform with a recessed cooler was optional. A T-top and a fiberglass hardtop were both options, but many SEs run with neither. This Center Console cover is patterned for the Parker 23 SE without a T-top, and like all of our Parker boat covers, it’s cut to this hull rather than a generic 23-foot size chart.

How It Fits the Parker 23 SE

The cover peaks over the console and windshield and slopes down to the gunwales, so rain runs off instead of pooling. Forward it covers the foredeck or forward platform and the anchor locker; through the middle it covers the leaning post and above-deck livewell, falling to the rubrail along the 8’6″ beam. Aft, it covers the stern jump seats and notched transom and wraps the outboard as one loose drape over the cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your SE has a T-top or hardtop, choose the Parker 2300 SE T-Top cover; for the 21-footer without a top, see the Parker 21 SE Center Console cover.

Sign up for updates and information about our business