7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
32 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Wellcraft 222 Fisherman, also listed as the 222F, the 22-foot center console with an 8'6" beam, no top over the console and a single outboard. Please confirm your model when you order; if you aren't sure, check the model name and length on your registration or hull paperwork.
They are two cover styles for the same hull. The Center Console cover is for a boat with no top and covers the entire boat, console, windshield and engine included. The T-Top cover fits up under a T-top and wraps its supports, leaving the roof exposed. Order the style that matches your boat as it sits.
No. This Center Console cover is cut for a boat with no top, so fold the Bimini down flat first. The cover then peaks over the console and slopes to the gunwales.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. The 222 Fisherman is rated for a single outboard of up to 250 hp. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$1,015.00 · Sunbrella$1,195.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Wellcraft 222 Center Console Boat Cover — Custom-Fit for the Wellcraft 222 Fisherman With No Top
Wellcraft got its start in Sarasota, Florida, in 1955 and has been part of Groupe Beneteau since 2014. The 222 Fisherman is a 22-foot offshore center console with an 8’6″ beam, a 20-degree deadrise, about 3,400 lb without engine and a 103-gallon tank, rated for a single outboard of up to 250 hp. It has a lounge seat on the front of the console with a porta-potti compartment inside, a leaning post, a 23-gallon livewell, a fold-out stern bench and gunwale rod storage. Standard boats were white, with Scarab Offshore colors and graphics offered as a package. A Bimini top was optional on boats without a T-top. This Center Console cover is patterned for the Wellcraft 222 Fisherman with no top over the console, and like all of our Wellcraft boat covers, it’s cut to this hull rather than a generic 22-foot size chart.
How It Fits the Wellcraft 222
This is a full cover for the whole boat. It peaks over the console and windshield, then slopes down to the gunwales in every direction, running bow to stern and rubrail to rubrail over the bow, the console lounge, the leaning post and the stern bench. At the stern it falls as one loose drape over the outboard cowling, with the lower unit exposed below the hem; tilt the engine down first. Fold down a Bimini top and take off any loose cushions before you put it on. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Center Console or T-Top Cover?
We sell two cover styles for the 222 Fisherman hull. This Center Console style is for a boat with no top; if yours has a T-top, choose the T-Top style, which fits up under the top.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 222 has a T-top, see our Wellcraft 222 Scarab T-Top cover, or for the 24-footer, our Wellcraft 242 Center Console cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.