Crevalle 24 Bay T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Crevalle 24 Bay Specifications

  • Builder: Crevalle Boats (Wildwood, FL)
  • Model Years: About 2016–2019 (boats seen for sale)
  • Length Overall: 23'6"
  • Beam: 8'6"
  • Dry Weight: About 3,200–3,800 lb (sources vary)
  • Fuel Capacity: 70 gal
  • Draft: 12" (hull)
  • Max Power: 300 hp, single outboard
  • Deadrise: 16° at the transom
  • Cover Shipping Weight: 34 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop or T-top frame, console and forward seat, leaning post, casting decks, transom and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 34 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Crevalle 24 Bay center console bay boat (23'6" overall, 8'6" beam) built in the brand's early years, roughly 2016 to 2019 on the boats we've seen, fitted with a T-top or hardtop. Tell us your year when you order and we'll confirm the pattern.
No. The 26 Bay is two feet longer and carries more fuel and a bigger deck, so it has its own pattern on our 26 Bay page.
Some 24 Bays were built with a tower and an upper helm station. Contact us with a photo before ordering, since a tower is shaped differently from a standard top.
Yes. Our T-Top style is made for any boat with a hard top of any kind, whether a T-top or a fiberglass hardtop. The cover runs up under the top and around its supports, so the roof stays exposed. Crevalle has offered more than one top (a hardtop, a hardtop with a three-sided glass enclosure, and a tower with a second station), so tell us which one your boat has when you order and we'll confirm fit before we cut.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,200.00  ·  9oz $1,490.00  ·  Sunbrella $1,775.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Crevalle 24 Bay T-Top Boat Cover — Custom-Fit for the Crevalle 24 Bay with T-Top or Hardtop

Crevalle Boats builds wood-free, resin-infused hybrid bay boats in Wildwood, in central Florida, under parent company Littoral Marine, which launched the brand in 2014 and was named Florida’s Small Manufacturer of the Year for 2017. The 24 Bay was the smaller of Crevalle’s two bay boats in the brand’s first years; the boats we found for sale run from 2016 to 2019. Florida Sportsman and FishTalk give it 23’6″ overall with an 8’6″ beam, 70 gallons of fuel, a 12-inch hull draft and 16 degrees of transom deadrise, rated for a single outboard of up to 300 hp (FishTalk’s test boat ran a Mercury Verado 250). The layout a cover has to clear is a center console with a forward seat over a baitwell, an aluminum leaning post with staggered rocket launchers, a raised aft casting deck over two release wells, a foredeck pre-wired for a trolling motor, a flip-up aft seat and optional bow cushions. Tops were optional, and reviewed boats wore a fiberglass hardtop on curved pipework. This T-Top cover is patterned for the Crevalle 24 Bay with its T-top or hardtop, and like all of our Crevalle boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the Crevalle 24 Bay

The cover runs up to the underside of the top and wraps its legs, leaving the roof exposed. Below, it falls over the console and forward seat and the leaning post, spreads forward over the casting foredeck to the rubrail, and runs aft over the raised casting deck and the transom to wrap the single outboard and jack plate in one piece. Pull rods from the top and leaning post before covering, and remove the trolling motor if fitted. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. At an 8’6″ beam, one person can install it. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Bay or HCO?

Crevalle’s later 24-footer is sold as the 24 HCO. We haven’t confirmed that it shares the 24 Bay’s deck and top, so if your boat says 24 HCO, send us your year and a photo before ordering and we’ll check the pattern.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the bigger sister, see the Crevalle 26 Bay T-Top cover; for the current 26-foot hybrid, the Crevalle 26 HCO T-Top cover.

Sign up for updates and information about our business