Crevalle 26 Bay T-Top Boat Cover — Custom-Fit for the Crevalle 26 Bay with T-Top or Hardtop
Crevalle Boats builds wood-free, resin-infused hybrid bay boats in Wildwood, in central Florida, under parent company Littoral Marine, which launched the brand in 2014 and was named Florida’s Small Manufacturer of the Year for 2017. The 26 Bay is Crevalle’s original 26-foot bay boat; the boats we found for sale run from 2016 to 2020, after which the 26 HCO carries on as the brand’s 26-foot hybrid. Salt Water Sportsman and factory listings give it 25’6″ overall with an 8’6″ beam, about 4,000 lb dry, 83 gallons of fuel, a 12-inch draft and 16 degrees of transom deadrise, rated for a single outboard of up to 400 hp on a notched transom with a jack plate. The layout a cover has to clear is a center console with a forward seat over a 12-gallon baitwell and a side door to a head compartment, a leaning post with rod holders and a rigging tray, a raised forward casting deck, two 28-gallon release wells aft, a 40-inch flip-up aft seat and an optional bow cushion package. Tops were optional; many boats carry a fiberglass hardtop on a powder-coated frame. This T-Top cover is patterned for the Crevalle 26 Bay with its T-top or hardtop, and like all of our Crevalle boat covers, it’s cut to this hull rather than a generic 26-foot size chart.
How It Fits the Crevalle 26 Bay
The cover runs up to the underside of the top and wraps its legs, leaving the roof exposed. Below, it drapes over the console and leaning post, spreads forward over the raised casting deck and bow cushions to the rubrail, and runs aft over the release wells, flip-up seat and swim platform to wrap the single outboard in one piece. Pull rods from the top and leaning post before covering, and remove the trolling motor if fitted. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
One of Three 26-Footers
Crevalle has built three 26-foot models on what the published figures show as the same 25’6″ by 8’6″ hull: the 26 Bay, the 26 HCO and the offshore-leaning 26 HBW. Our cover maker keeps a separate pattern for each, so order the one that matches the name on your boat; if you’re unsure, send us your year and a photo of the bow and top.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the boat that followed it, see the Crevalle 26 HCO T-Top cover; for the smaller sister, the Crevalle 24 Bay T-Top cover.
