Blazer Bay 2220 Fisherman Specifications
- Length Overall (LOA): 22'2"
- Beam: 8'4"
- Dry Weight: ~1,800 lbs
- Engine: Single outboard, max 250 HP
- Fuel Capacity: 59 gallons
- Draft: ~12"
- Hull Type: 100% composite, hand-laid fiberglass, 15° deadrise
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 22'2" Blazer Bay 2220 Fisherman specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 32 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
We offer three fabric tiers for the 2220 Fisherman. The 7 oz polyester provides lightweight, budget-friendly protection for boats that spend most of their time under a carport or lift. The 9 oz solution-dyed polyester — our most popular choice — delivers superior UV resistance and mildew protection rated for 5 to 7 years of continuous outdoor use. The premium Sunbrella acrylic upgrade extends that to 8 to 10 years, making it ideal for Gulf Coast owners who leave their 2220 dockside in full-sun conditions year-round.
Yes — the cover is custom-patterned with reinforced cutouts that wrap precisely around the 2220 Fisherman's factory T-Top support legs. The fabric attaches at the underside edge of the T-Top hardtop, then drapes down around the support posts and extends to the hull's chine. The white fiberglass hardtop remains fully exposed on top while everything below — console, leaning post, cockpit, and hull sides — is enclosed. The cutouts use reinforced binding to prevent fraying where fabric meets the T-Top legs.
Installation takes under five minutes solo. Drape the cover over the T-Top frame from the hardtop attachment points, letting the fabric fall naturally around the support legs. Pull the cover forward to the bow and aft to the transom, then down each side. Secure the hem cord along the rub rail and fasten the adjustable tie-down straps underneath the hull. The pattern is cut to the 2220's 22'2" length and 8'4" beam, so everything aligns without forcing.
Absolutely. The cover is reinforced at every high-stress point — bow eye, T-Top leg cutouts, cleat locations, and transom edge — with double-stitched seams that handle sustained wind pressure and vibration at highway speeds. The 2220 Fisherman's relatively light 1,800-pound dry weight makes it one of the most frequently trailered bay boats on the Gulf Coast, and the adjustable strap system cinches tight to prevent billowing during transit.
The cover creates a complete barrier over every exposed surface below the T-Top hardtop. The helm electronics, fishfinder, leaning post, aerated livewells, rod holders, insulated storage, and all cockpit upholstery sit fully enclosed. UV rays, rain, salt spray, bird droppings, and pollen are blocked from reaching these surfaces. The 2220 Fisherman's shallow-water fishing features — including under-gunwale rod storage and flush-mount hardware — are all accounted for in the custom pattern.
Every cover includes a 2-year manufacturer warranty covering defects in materials and workmanship — stitching failures, fabric delamination, hardware corrosion, and snap or buckle breakage. This applies whether your 2220 Fisherman is stored on a trailer, boat lift, or at a dock. The 9 oz solution-dyed fabric typically delivers 5 to 7 years of reliable service, and the Sunbrella upgrade extends that to 8 to 10 years in demanding Gulf Coast environments.
The cover is water-resistant with a durable water-repellent (DWR) finish that causes rain and spray to bead and roll off. It is intentionally not sealed waterproof — a fully sealed cover would trap moisture underneath and promote mildew on the 2220 Fisherman's upholstery and gel coat, especially in the humid Gulf Coast climate where the boat is typically used. The breathable construction allows air circulation while blocking direct water contact.
The cover is patterned to fit the standard-production Blazer Bay 2220 Fisherman with a factory T-Top. Blazer Boats has maintained the 2220's core hull dimensions — 22'2" LOA, 8'4" beam, and 15-degree deadrise — consistently since the model's introduction. If your boat has significant aftermarket modifications that change the profile, contact us to confirm fitment before ordering.
The 9 oz solution-dyed polyester is available in Navy, Black, and Charcoal. The 7 oz option offers the same three colors at a lighter weight. Upgrading to Sunbrella acrylic unlocks additional shades including Captain Navy, Pacific Blue, and Forest Green. All fabrics use solution-dyed fiber where pigment is embedded during manufacturing, so the cover resists UV fading even under the intense Gulf Coast sun.
Shipping is a flat rate of $30 per cover to anywhere in the continental United States. Orders typically ship within 1 to 2 business days via ground carrier. The cover arrives folded in a compact box with all mounting hardware included — stainless steel snaps, adjustable tie-down straps, hem cord, and T-Top attachment fittings — ready for immediate installation.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Blazer Bay 2220 Fisherman T-Top Boat Cover — Inshore Craftsmanship Deserves Premium Protection
The Blazer Bay 2220 Fisherman measures 22 feet 2 inches with an 8-foot 4-inch beam, weighs approximately 1,800 pounds dry, and runs up to 250 horsepower on 59 gallons of fuel. With a shallow draft around 12 inches and a 15-degree deadrise, this bay boat was purpose-built for skinny-water flats and marsh fishing across the Gulf Coast. Blazer Boats has been family-owned and operated in Pensacola, Florida since 1978 — one of the last independent builders in an industry dominated by corporate conglomerates. Every hull is hand-laid with 100 percent composite construction and zero wood, backed by a 10-year limited warranty. A custom-fitted T-Top cover from Perfect Fit Boat Covers keeps this hand-built bay boat protected from sun, rain, salt, and debris between trips.
Tailored to the 2220 Fisherman’s Classic Bay Boat Layout
This cover is pattern-cut specifically for the 2220 Fisherman’s deck layout — accounting for the T-Top frame and support legs, center console with flush-mounted electronics, leaning post with integrated rod holders, forward casting platform, and port and starboard gunwale rod storage. The cover drapes from below the hardtop down to the rubrail, secured with adjustable strap-and-buckle tie-downs that cinch tight for a snug, rattle-free fit. One person can install it in under five minutes without tools. With a 12-inch draft, the 2220 launches from the shallowest ramps, and the reinforced cover stays locked down at highway speeds for confident trailering. For Blazer Bay’s versatile family bay boat, take a look at the Blazer Bay 2440 T-Top cover designed for the brand’s spacious mid-size platform.
Protection That Matches Blazer Bay Quality
Blazer Bay builds every boat by hand with zero-wood composite construction, and your cover should match that standard. Choose from 9-ounce solution-dyed marine fabric rated for 5 to 7 years of UV and weather resistance, or upgrade to premium Sunbrella acrylic for 8 to 10 years of fade-free durability. Both options are water-repellent, mildew-resistant, and breathable to prevent trapped moisture from damaging upholstery and electronics underneath. Double-stitched seams and a hem cord at the rubrail ensure a secure, long-lasting fit. Every cover ships with a 2-year manufacturer warranty, so your investment is protected from day one. For anglers who want tournament-level coverage on a larger platform, the Blazer Bay 2550 GTS T-Top cover delivers the same premium protection scaled up for nearshore duty.
Reviews
There are no reviews yet.