Blazer Bay 2700 Hybrid Bay Specifications
- Length Overall: 26'7"
- Beam: 9'2"
- Fuel Capacity: 110 gal
- Max Power: Single outboard, up to 450 hp
- Deadrise: 17° at transom
- Draft: About 16" fully loaded
- Interior Freeboard: 24"
- Livewells: Three aerated livewells, including a 35-gal well in the leaning post
- Top: Standard premium hardtop on a powder-coated frame
- Cover Shipping Weight: 37 lbs
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
- Coverage: Runs up to the underside of the hardtop, wraps the frame legs, and covers the console, seating, casting deck, jack plate and outboard; roof stays exposed
- Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
- Protection: UV-resistant, water-repellent, breathable
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 37 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Blazer Bay 2700 Hybrid Bay (26'7" overall, 9'2" beam) with its hardtop or a T-top. It is not cut for Blazer's other large bay boats, such as the 2800 Makaira or Makaira 2600, so check your model name before ordering.
Our T-Top covers are built for any center console with a top on legs. The cover runs up to the underside of the hardtop and wraps the frame, so the roof stays exposed and the rest of the boat is covered.
No. The 2550 GTS is about a foot shorter and 8 inches narrower, so this cover would be too big. Order the Blazer Bay 2550 GTS T-Top cover for that boat.
Not the trolling motor. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one, and the order form will ask you to confirm you'll remove it. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,700.00 · 9oz $1,925.00 · Sunbrella $2,285.00 — your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628
Questions about fit? Call (561) 677-2628
Blazer Bay 2700 Hybrid Bay T-Top Boat Cover — Custom-Fit for the Blazer Bay 2700 Hybrid Bay With Its Hardtop
The Blazer Bay 2700 Hybrid Bay is the builder’s big hybrid bay boat, a deep-V hull meant to handle open water while still drafting shallow enough for the flats; listings date back to the 2020 model year and it remains in Blazer’s current lineup. Blazer Bay boats are built by Blazer Boats in Pensacola, Florida, a builder the Craft family started in 1978 that makes both bass boats and bay boats. Per the factory, the 2700 Hybrid Bay measures 26’7″ overall with a 9’2″ beam, carries 110 gallons of fuel, drafts about 16 inches fully loaded, has 24 inches of interior freeboard and is rated for a single outboard up to 450 hp on a 17° deadrise, all-composite hull with Lenco trim tabs and a hydraulic jack plate. Standard features include three aerated livewells (one a 35-gallon well in the leaning post with five rod holders), a large front casting deck with recessed hinges, two large rod boxes, a built-in insulated cooler, a console with a Porta Potti, LLeBroc double-bolster flip-down helm seating, flip-up rear seating, a tinted windshield, and a standard premium hardtop on a powder-coated frame. This T-Top cover is patterned for the Blazer Bay 2700 Hybrid Bay with its hardtop, and like all of our Blazer Bay boat covers, it’s cut to this hull rather than a generic 27-foot size chart.
How It Fits the Blazer Bay 2700 Hybrid Bay
The cover runs up to the underside of the hardtop and wraps the powder-coated frame legs, then drapes over the console and tinted windshield, the double-bolster seat and livewell leaning post, the front casting deck and the flip-up rear seating down to the gunwales, and continues over the transom, jack plate and outboard as one piece; the hardtop roof stays exposed. It’s cut for the 2700’s 9’2″ beam and higher sides, which give the hem a longer drop to the rubrail than a typical bay boat. Remove a bow trolling motor before covering. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a smaller Blazer Bay, see the Blazer Bay 2550 GTS T-Top cover or the Blazer Bay 2220 Fisherman T-Top cover.