Crevalle 26 HBW T-Top Boat Cover — Custom-Fit for the Crevalle 26 HBW (Hybrid Blue Water) with Hardtop
Crevalle Boats builds wood-free, resin-infused hybrid bay boats in Wildwood, in central Florida, under parent company Littoral Marine, which launched the brand in 2014 and was named Florida’s Small Manufacturer of the Year for 2017. The 26 HBW, which Florida Sportsman spells out as Hybrid Blue Water, is the offshore-leaning version of Crevalle’s 26-foot hybrid. It grew out of the 26 Open in 2020 and was still being sold in 2025. Boating’s 2022 test gives it 25’6″ overall with an 8’6″ beam, about 4,000 lb without power, 90 gallons of fuel, a 12- to 14-inch draft and 16 degrees of transom deadrise, rated for a single outboard of up to 400 hp; the test boat ran a Suzuki DF300B. What sets it apart is the bow: the forward seating of the HCO is removed for a wide, open forward cockpit with tackle boxes in the bow inwales and an optional coffin box with a backrest. Aft, an abbreviated casting deck hides two 28-gallon release wells and a fold-out 40-inch bench, with rod and tackle storage in both gunwales. Many carry the optional hardtop with a three-sided glass enclosure. This T-Top cover is patterned for the Crevalle 26 HBW with its hardtop, and like all of our Crevalle boat covers, it’s cut to this hull rather than a generic 26-foot size chart.
How It Fits the Crevalle 26 HBW
The cover runs up to the underside of the hardtop and wraps its frame and glass enclosure, leaving the roof exposed. Below, it drapes over the console and leaning post, spreads forward over the open bow and coffin box (if fitted) to the rubrail, and runs aft over the casting deck, fold-out bench and swim platform to wrap the single outboard in one piece. Pull rods from the top and leaning post before covering, and remove the trolling motor if fitted. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
One of Three 26-Footers
Crevalle has built three 26-foot models on what the published figures show as the same 25’6″ by 8’6″ hull: the 26 Bay, the 26 HCO and the offshore-leaning 26 HBW. Our cover maker keeps a separate pattern for each, so order the one that matches the name on your boat; if you’re unsure, send us your year and a photo of the bow and top.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the family-seating version, see the Crevalle 26 HCO T-Top cover; for the original bay boat, the Crevalle 26 Bay T-Top cover.
