Custom Fit Boat Covers for Pro-Line Boats
Pro-Line has been building practical, hard-working fishing boats in Florida since 1968, earning a loyal following for affordable, no-nonsense saltwater boats across a huge range of layouts — center consoles, walkarounds, dual consoles, express cruisers, and bay boats from the high teens to the mid-30s. With so many configurations and decades of models on the water, the right cover depends entirely on your exact boat. Our custom Pro-Line boat covers are patterned to your specific model and year for a snug, protective fit.
Pro-Line Models We Cover
T-Tops: 20 Sport, 21, 23 Sport, 24 Super Sport, 26 Super Sport, 29 Grand Sport, 220 Sport
Proline Boat Cover Features and Benefits
Cut to your exact Pro-Line model and year — console, walkaround cabin, or dual console — so the cover fits snug instead of draping loose like a universal cover.
Solution-dyed marine fabric resists sun, salt, and humidity without fading, keeping your Pro-Line protected season after season.
A water-repellent finish helps rain and spray sheet off instead of pooling, while breathable construction limits trapped moisture and mildew.
Every Pro-Line cover is custom cut and sewn to order in the USA with reinforced seams, secure tie-downs, and a tailored fit.
About Pro-Line Boats
Pro-Line Boats was incorporated in 1968 by Dan Atwood and his father Ray, and grew into one of Florida’s best-known builders of affordable, capable saltwater fishing boats. Operating out of Homosassa, Florida, Pro-Line built a reputation on wood-free composite construction and an unusually broad lineup — center consoles, walkarounds, cuddy cabins, dual consoles, express cruisers, and bay boats ranging from about 15 to 35 feet. Models like the 22 and 29 Walkaround, 23 Sport, and 32 Express are still fished up and down the coast.
Why Protect Your Pro-Line with a Custom Cover?
Saltwater boats take a beating from sun, salt, and rain whenever they aren’t running. UV fades gelcoat and upholstery, rain pools in open cockpits, and salt corrodes hardware. A snug cover shields the console, cabin, deck, and seating on the trailer, at the slip, or in storage — protecting both condition and resale value on a boat built to work hard for years.
Custom-Fit vs. Generic Covers
A universal cover sits loose, flaps at highway speed, and traps moisture against the gelcoat. Our Pro-Line covers are patterned to your specific model and year for a tailored fit that sheds water, resists wind, and stays put — so it protects the boat instead of scuffing it.
Built for a Wide-Ranging Lineup
Pro-Line has built everything from open center consoles to walkaround cabins and express cruisers, so two Pro-Lines can need completely different covers. We pattern to your exact model, year, and configuration — including a T-top, hard-top, or windshield if your boat has one — for a clean fit, even on older Pro-Line hulls.
Features of Our Pro-Line Boat Covers
Each cover is crafted from marine-grade, UV-resistant fabric chosen to handle sun, salt, and humidity without fading or cracking. Reinforced stitching, tailored seams, and secure tie-downs keep it snug and quiet on the road, while a water-repellent finish helps rain and spray run off instead of soaking through.
Ready to Cover Your Pro-Line?
Select your model above to start a custom cover built for your exact Pro-Line — whether it’s a center console, walkaround, dual console, or express. Every cover is proudly custom-made in the USA. Not sure of your model, year, or top configuration? Contact us and we’ll help.
Frequently Asked Questions - Pro-Line Boat Covers
Which Pro-Line models do you provide covers for?
We offer custom-made T-top covers for a variety of Pro-Line models, including the 20 Sport, 23 Sport, and 29 Grand Sport.
How effective are these covers at protecting my boat from the elements?
Our covers are water-resistant and provide protection from rain, moisture, and environmental factors. They offer excellent coverage under typical weather conditions.
Can I use the cover while trailering my boat?
Yes, our covers are designed to be used during trailering, providing protection from road debris, dust, and adverse weather while keeping your boat secure.
How do I select the right cover for my Pro-Line boat?
Use our cover selector tool by entering your boat’s make and model to find the best-fitting cover for your Pro-Line vessel.
How do I maintain my boat cover?
To maintain your boat cover, brush off loose dirt regularly and rinse with fresh water. For tougher stains, use a mild soap solution and a soft brush, avoiding harsh chemicals to preserve the fabric's durability.
Which Pro-Line models do you make covers for?
We make custom covers across Pro-Line's broad lineup — center consoles, walkarounds (such as the 22 and 29), dual consoles, the 23 Sport, and express models like the 32. Tell us your model, year, and top configuration and we'll match the right pattern.
I have an older Pro-Line — can you still cover it?
Yes. Pro-Line has been building boats since 1968 and many older hulls are still fishing. We pattern covers for both current and older models — just give us your model and year and we'll match the correct fit.
Does a walkaround cabin or T-top change the cover?
It does. A walkaround cabin, T-top, hard-top, or windshield each changes the shape the cover must clear, and each takes a different pattern. Let us know your exact configuration and we'll build the cover to fit it.
Are your Pro-Line covers made in the USA?
Yes — every Pro-Line cover is custom-made in the USA from marine-grade, water-repellent fabric built to handle sun and salt.
Helpful boat cover guides
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.