Proline 23 Sport T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Pro-Line 23 Sport Specifications

  • Builder: Pro-Line Boats
  • Type: Center console
  • Length: 23'0"
  • Beam: 8'6"
  • Draft: 17" (one review: 1'5")
  • Deadrise: 20°
  • Hull Weight: About 3,500 lb
  • Fuel: 118 gal
  • Power: Single outboard, up to 300 hp
  • Cover Shipping Weight: 33 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the T-top, wraps the legs, and covers the console, leaning post, casting deck, cockpit and outboard cowling; T-top roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Pro-Line 23 Sport center console — 23'0" with an 8'6" beam — fitted with a T-top. Please confirm your model and year when you order so we can check the pattern before we cut.
HMY's guide notes that the 22-foot Sport hull was briefly sold as the 23 Sport before the current 23-foot boat came out. If your 23 Sport has an 8'5" beam rather than 8'6", contact us before ordering so we can tell you which pattern fits.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way. If your 23 Sport has a factory T-top, a hardtop or an aftermarket frame, tell us which when you order.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,050.00  ·  9oz $1,300.00  ·  Sunbrella $1,560.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Pro-Line 23 Sport T-Top Boat Cover — Custom-Fit for the Pro-Line 23 Sport

Pro-Line Boats built its center consoles in Crystal River, Florida, before production moved to the Fountain Powerboats plant in Washington, North Carolina. The 23 Sport is Pro-Line’s 23-foot single-outboard center console. Factory specs list 23’0″ with an 8’6″ beam, a 17-inch hull draft, 20 degrees of deadrise, 118 gallons of fuel, a 300 hp maximum and room for eight; the hull weight is given as about 3,500 lb (3,450 to 3,540 lb depending on the source). The console has a head compartment and a forward seat with storage, which HMY says flips over a 25-gallon baitwell. Aft is an aluminum leaning post with backrest and rod holders, an 18-gallon lighted livewell and two 60-gallon fishboxes with macerators, plus under-gunwale rod storage, a walk-through transom and an integrated dive platform. Up front, an insulated fish box sits under the bow casting deck. One review notes the forward T-top legs mount to the console rather than the deck. This T-Top cover is patterned for the Pro-Line 23 Sport with its T-top, and like all of our Pro-Line boat covers, it’s cut to this hull rather than a generic 23-foot size chart.

How It Fits the Pro-Line 23 Sport

The cover runs up to the underside of the T-top and wraps its legs, so the roof and its rocket launchers stay exposed. Below the top it takes in the console, windshield and leaning post, then runs forward over the console seat and casting deck to the stem, falling to the rubrail along the 8’6″ beam. Aft, it covers the livewell and walk-through transom and falls as one loose drape over the outboard cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Two Boats Called 23 Sport

HMY’s guide says Pro-Line’s 22-foot Sport (22’5″, 8’5″ beam) was sold as the 23 Sport for a couple of seasons before the 23-foot hull described here arrived. They aren’t the same boat, so tell us your year and beam when you order and we’ll confirm the pattern.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 22-footer, see our Pro-Line 220 Sport T-Top cover; for the next size up, see the Pro-Line 24 Super Sport T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })