Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and covering the casting decks, leaning post, jump seats and outboard cowling
Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
32 lbs
Fabric
9oz Polyester
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Hunt BX 22 BR bay boat without a T-top: the 22'10" hull with an 8'5" beam and a single outboard. It isn't the earlier BX 22 Pro (22'3", narrower), the 22 RZR or the 22 Navigator, so please confirm your model and year when you order so we can check the pattern before we cut.
The cover runs over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Tilt the engine down (and lower the jack plate if you have one) so the fabric hangs evenly.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Yes, as long as the bimini is folded down and stowed first. If your BX 22 BR has the fiberglass or D-tubing T-top, use our 22 BXBR T-Top cover instead.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz$1,015.00 · Sunbrella$1,195.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Hunt 22 BXBR Center Console Boat Cover — Custom-Fit for the Sea Hunt BX 22 BR Bay Boat Without a T-Top
Sea Hunt builds the BX 22 BR (Bay Runner) in Columbia, South Carolina as the 22-foot model in its BX bay boat line, alongside the BX 25 FS and BX 28. The factory lists a 22’10” length overall, an 8’5″ beam, a 13-inch draft, a 2,700 lb dry weight, 53 gallons of fuel and a 15/20/50-degree deadrise, with a single Yamaha outboard of up to 250 hp. There’s a casting deck up front over 200 quarts of bow storage, lockable port and starboard rod storage, an 18-gallon livewell in the console and a 20-gallon livewell aft. Current boats have an aluminum leaning post with captain’s chairs (earlier listings show a reversible stainless seat), plus aft jump seats with backrests and a raised rear deck. Trim tabs and a trolling motor plug are standard, and a jack plate is optional. This Center Console cover is patterned for the BX 22 BR without a T-top, and like all of our Sea Hunt boat covers, it’s cut to this hull rather than a generic 22-foot size chart.
How It Fits the BX 22 BR
The cover peaks over the console and slopes down to the gunwales so rain runs off. It runs from the stem over the front casting deck, takes in the console and leaning post, then covers the rear deck and jump seats and falls to the rubrail along the 8’5″ beam. At the stern it falls as one loose drape over the outboard, and the lower unit stays exposed below the hem. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your BX 22 BR has a T-top, choose our Sea Hunt 22 BXBR T-Top cover instead; for the smaller bay boat, see the Sea Hunt 20 BXBR Center Console cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.