Chaos 21 Tarpon Bay Center Console Boat Cover & Canvas

Chaos 21 Tarpon Bay Center Console Specifications

  • Builder: Chaos Boats (founded in New Smyrna Beach, FL)
  • Length Overall: 20'4"
  • Beam: 8'2"
  • Hull Weight: About 1,950 lbs (dry, no engine)
  • Draft: About 11 in.
  • Fuel Capacity: 53 gal
  • Max Horsepower: 200 hp (single outboard)
  • Hull: Carolina-style, vacuum-bagged, 100% wood-free
  • Layout: Bow casting deck, center console with seat, leaning post, 25-gal livewell
  • Cover Shipping Weight: 31 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full-boat cover that peaks over the console, slopes to the gunwales and wraps the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 31 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It is patterned for the Chaos 21 Tarpon Bay, Chaos Boats' 21-foot shallow-water center console: 20'4" overall with an 8'2" beam and a single outboard. Listings we found run from 2014 to 2020. It is not cut for the Release Tarpon 21 Bay, which is a different boat from a different builder, or for the smaller Chaos 16 Bonefish.
No. This is a center-console cover for the boat without a T-top. A T-top needs a cover that runs up to the underside of the top and around its legs, so contact us before ordering if your boat has the factory T-top. A folding bimini should be lowered and stowed in its boot before covering; ask us first if you are not sure it will clear.
The cover encloses the leaning post and console seat. Take rods out of the four leaning-post holders, the six vertical holders on the console sides and the flush gunwale holders before covering so the fabric lies smooth and nothing wears through. Rods in the under-gunwale racks sit below the rubrail line, but stow them inside if you can.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $895.00  ·  Sunbrella $1,045.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Chaos 21 Tarpon Bay Center Console Boat Cover — Custom-Fit for the Carolina-Style Shallow-Water Skiff

Chaos Boats, founded by Marc and Heather Vickers in New Smyrna Beach, Florida, builds shallow-water fishing boats on a Carolina-style hull with flare at the bow and tumblehome toward the stern. The 21 Tarpon Bay is the larger of its two models, above the 16 Bonefish, and the listings we found date from 2014 to 2020. The factory spec sheet lists it at 20’4″ overall with an 8’2″ beam, about 1,950 lbs dry without an engine, an 11-inch draft, 53 gallons of fuel and a single outboard rated to 200 hp. The layout matters for a cover: a large snag-free bow casting deck with a 200-quart bow box and an anchor locker, a center console with a Carolina-style helm pod, a grab rail and a cushioned console seat, a leaning post with four rod holders, six vertical rod holders on the console sides, a 25-gallon livewell and a 100-quart insulated box aft. This cover is patterned for the Chaos 21 Tarpon Bay as a center console without a T-top, and like all of our Chaos boat covers, it’s cut to this hull rather than a generic 21-foot size chart.

How It Fits the Chaos 21 Tarpon Bay

The console and its grab rail are the high point, so the pattern peaks there and slopes out over the flared bow and the 8’2″ beam to the rubrail, letting rain run off instead of pooling on the casting deck. Forward it lies flat over the bow box and anchor-locker lids; amidships it encloses the console seat and the leaning post; aft it covers the cockpit and the 100-quart box and wraps the outboard as one piece. Before covering, pull rods out of the leaning-post holders, the console-side verticals and the flush gunwale holders so nothing pokes or chafes through the fabric. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Not the Same as the Release Tarpon 21 Bay

The name is easy to mix up: Release Boats also sold a 21-foot bay boat called the Tarpon 21 Bay (spelled “Tarpen” in some listings), with a narrower 7’10” beam. This pattern is for the Chaos model only. Chaos also offered a factory T-top and a stainless bimini as options on the 21 Tarpon Bay; if your boat has a T-top, contact us before ordering so we can confirm the fit. If your boat has Power-Poles or other shallow-water anchors such as a Talon, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Shopping for another bay-style center console around this size? See our NauticStar 2110 Nautic Bay CC cover or the Bluewave 2000 SL Bay CC cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })