Costa Custom 264 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Costa Custom 264 Specifications

  • Builder: Costa Custom Boats (Pinellas County, Florida)
  • Hull Type: Hybrid power catamaran (twin hulls)
  • Length Overall: 26'4"
  • Beam: 10'
  • Draft: About 15"
  • Weight: About 6,800 lb (fully rigged with second station)
  • Fuel Capacity: 200 gal (two 100 gal tanks)
  • Power: Twin outboards, typically Mercury 300 hp
  • Livewell: About 80 gal (some listings say 90)
  • Cover Shipping Weight: 39 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop supports, console and leaning post, full 10' beam over both hulls to the rubrail, coffin box and bow, livewell, and twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 39 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

Yes. The 264 and the 264 HC are the same 26'4" hybrid catamaran with a 10' beam; dealers list it under both names. It's patterned for this boat and isn't cut for Costa Custom's larger 32 or 34-foot models. Send us your model year and a photo with your order and we'll confirm the fit.
The 264's deck spans two hulls, so the cover is cut to the full 10' beam and drapes over both sponsons to the rubrail, running rail to rail rather than tapering at the bow like a monohull cover. The tunnel between the hulls stays open underneath.
Yes. Our T-Top covers are made for any boat with a hard top. The cover runs up under the hardtop and around its supports, leaving the roof, the second-station controls and any sunroof exposed, and drapes over the console, deck and outboards below. Because tops vary from boat to boat, let us know which one you have.
Yes. The stern section wraps both outboards as part of the same cover, so you don't need separate motor covers. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. If you have other transom-mounted gear, mention it when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,900.00  ·  9oz $2,150.00  ·  Sunbrella $2,550.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Costa Custom 264 T-Top Boat Cover — Custom-Fit for the Costa Custom 264 Hybrid Catamaran

Costa Custom Boats is a Pinellas County, Florida builder (dealer listings give its home as Largo) that makes high-performance custom power catamarans for offshore fishing and coastal boating. The 264, also sold as the 264 HC, is the builder’s 26-foot hybrid catamaran, listed from the 2020 model year on. It measures 26’4″ overall with a 10′ beam, drafts about 15 inches, weighs about 6,800 lb fully rigged with a second station, and carries 200 gallons of fuel in two 100-gallon tanks. The boats we’ve seen run twin Mercury 300 hp outboards, often on jack plates. Builder copy credits the twin-hull design with a smooth, dry ride in rough water. Features that shape a cover include a center console under a hardtop, often with an upper second station and sometimes a sliding sunroof, a leaning post with a tackle station, an aft livewell of about 80 gallons and an insulated coffin box forward. This T-Top cover is patterned for the Costa Custom 264 with its top, and like all of our Costa Custom boat covers, it’s cut to this hull rather than a generic 26-foot size chart.

How It Fits the Costa Custom 264

The cover runs up to the underside of the hardtop and wraps its supports, so the roof, the upper-station controls and any radar stay outside. Below the top, it falls over the console and leaning post. Because the 264 is a twin-hull boat, the deck spans both hulls at nearly full width, so the cover is cut to the full 10′ beam and drapes down over both sponsons to the rubrail rather than tapering like a monohull cover; the tunnel between the hulls stays open underneath. Forward, it covers the coffin box and bow, and aft it spans the livewell and continues over the transom to wrap both outboards in one piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Tell Us How Your 264 Is Rigged

Each 264 is built to order, so tops and rigging vary — hardtops with or without a second station, sunroofs, trolling motors and shallow-water anchors. Our T-Top style is made for any boat with a hard top, so it’s the right style whichever top you have. When you order, tell us which top is on your boat and send a photo; we’ll confirm the fit. If you run a trolling motor, remove it before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If you’re comparing other power catamarans with tops, see our Twin Vee 280 GFX2 T-Top cover and World Cat 235 HB T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })