East Cape 17 Caimen Center Console Boat Cover — Custom-Fit for East Cape’s Technical Poling Skiff
The Caimen is the no-nonsense technical poling skiff that East Cape now calls “the guide’s simple, brilliant workhorse.” Texas Saltwater Fishing Magazine described it as a totally new design for the company when it appeared — spray rails to handle bigger water while staying skinny, and a hull that holds its line on the pole whether headed into or across the wind. East Cape’s published specs put the Caimen at 17’10” long with a 61.5″ (about 5’1″) beam, a real-world draft of 4″–7″ fully rigged with two anglers and gear, and 25–70 hp of suggested outboard power, on a vacuum-infused, vinylester hull with a lightweight high-density core. Honda’s 2008 test of a side-console Caimen 17 lists a weight of 350 lb, a 10-gallon tank and a 50 hp maximum at that time. Boats seen for sale run from 2014 to 2015 model years, and today the Caimen sits in East Cape’s Legacy Fleet as a retired classic built on special request, alongside a lighter Caimen Lite. East Cape offered it as a tiller, side-console, centered or offset console, or tower boat, usually with a poling platform aft and a casting platform forward. This full cover is patterned for the 17 Caimen with its console, and like all of our East Cape boat covers, it’s cut to this hull rather than a generic 18-foot size chart.
How It Fits the 17 Caimen
At barely over five feet wide, the Caimen needs a narrow cover, and a generic 18-footer cover would bag and flap on it. Ours peaks over the console and slopes straight down to the low gunwales, runs flat over the open bow deck and stern, and wraps the outboard at the transom in the same piece so rain runs off rather than pooling on the flush decks. Take off removable gear before covering — push pole, casting platform and anything clipped to the poling platform — and remove a bow-mount trolling motor if you run one. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Console, Tiller or Tower?
Because East Cape built the Caimen in several steering and platform arrangements, tell us how yours is rigged when you order: console position, whether a poling platform or tower sits over the motor, and your outboard size. We’ll confirm the fit against this pattern before your cover is cut. The larger Vantage uses a bigger version of this hull and has its own pattern.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Comparing East Cape patterns? See our East Cape Vantage cover, the East Cape 17 EVO X cover, or the East Cape 17 Glide cover.
