Edgewater 230 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Edgewater 230 Specifications

  • Builder: EdgeWater Power Boats, Edgewater, Florida
  • Model Years: About 2019–current (HMY)
  • Length: 22'8" hull; 24'6" overall
  • Beam: 8'6"
  • Draft: About 15"
  • Weight: About 4,563 lb with engine
  • Fuel Capacity: 110 gal
  • Max Power: 300 hp single outboard
  • Hull: Variable-deadrise deep-V, all-composite
  • Cover Shipping Weight: 33 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop frame, console and windshield, bucket bench seat, bow lounge, stern seat and outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The EdgeWater 230 CC center console, introduced for 2019, with its hardtop. Tell us your model year when you order so we can confirm the fit.
No. The 228 is a different boat with a leaning post, a different top and a shorter overall length, so it has its own pattern.
EdgeWater lists the 230 at 22'8" for the hull but 24'6" overall, and the cover has to reach the full overall length to enclose the stern and outboard. That's why it's patterned to this boat rather than sized by nominal length.
Our T-Top style is made for any boat with a hard top — an aluminum T-top, a canvas-roofed T-top frame or a fiberglass hardtop. The cover runs up under the top and around its supports, so the roof stays exposed. The 230's fiberglass hardtop sits on a T-top frame, and the cover fits up underneath it. If you've added outriggers or an enclosure, tell us when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,050.00  ·  9oz $1,300.00  ·  Sunbrella $1,560.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Edgewater 230 T-Top Boat Cover — Custom-Fit for the EdgeWater 230 CC

EdgeWater Power Boats builds its boats in Edgewater, Florida; the company was founded in 1992 by Bob Dougherty, formerly chief designer and head of engineering at Boston Whaler, and molds its hulls with a closed-mold, vacuum-infused process it calls Single Piece Infusion. The 230 CC is EdgeWater’s 23-foot family-and-fishing center console, introduced for 2019 according to HMY, with listings through 2025. The 2020 factory sheet gives a 22’8″ hull length and 24’6″ overall, an 8’6″ beam, a 15-inch draft, 4,563 lb with the engine, 110 gallons of fuel and a single outboard of up to 300 hp — the Yamaha F250 standard and F300 optional. The top is a fiberglass hardtop on a powder-coated T-top frame, with two LED spreader lights, an electronics box, a PFD bag and four rod holders on the frame. The 230 is laid out more for family use than the 228: instead of a leaning post it has a powder-coated bucket bench seat with armrests, flip-up bolsters and a slide-out 94-quart cooler, and the bow has a U-shaped lounge with bolster cushions, a filler and a table. Other features a cover has to clear include the walk-in console with a glass windshield and forward console seat, an integrated stern seat, a retractable ski pylon and an integrated swim platform with ladder. This T-Top cover is patterned for the 230 CC with its hardtop, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 23-foot size chart.

How It Fits the 230

The cover runs up to the underside of the hardtop and wraps the frame legs, leaving the roof and its electronics box exposed. Below, it drapes over the glass windshield, console and bucket bench seat, spreads forward over the U-shaped bow lounge to the rubrail along the 8’6″ beam, and continues aft over the stern seat and swim platform to enclose the outboard in the same piece. Because the 230 is two feet longer overall than its 22’8″ hull length, a generic 22-foot cover would come up short at the stern. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 22-foot model before it, see the Edgewater 228 T-Top cover; for the next size up, the Edgewater 245 T-Top cover.

Sign up for updates and information about our business