Edgewater 245 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Edgewater 245 Specifications

  • Builder: EdgeWater Power Boats, Edgewater, Florida
  • Model Years: About 2004–current
  • Length Overall: 24'6"
  • Beam: 8'6"
  • Draft: About 21"
  • Weight: About 5,550 lb (current)
  • Fuel Capacity: 140 gal (150 gal on 2010 sheet)
  • Max Power: 400 hp, single or twin outboards
  • Cockpit: 89 sq ft
  • Cover Shipping Weight: 34 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Hardtop or T-top frame, console and windshield, leaning post, bow lounge, transom and single or twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 34 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The EdgeWater 245 CC center console with its hardtop or T-top. It has been built since about 2004, so tell us your model year when you order so we can confirm the fit.
No. The 248 CX shares the 24'6" length and 8'6" beam, but it's a dual console with a glass windshield and a different seating layout, so it has its own pattern.
Yes. The stern wraps a single outboard or a twin-engine setup as part of the same cover. Tell us which your boat has when you order.
Our T-Top style is made for any boat with a hard top — an aluminum T-top, a canvas-roofed T-top frame or a fiberglass hardtop. The cover runs up under the top and around its supports, so the roof stays exposed. The 245 has been sold with a fiberglass hardtop, an aluminum T-top or no top over the years, so tell us which top your boat has when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,200.00  ·  9oz $1,490.00  ·  Sunbrella $1,775.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Edgewater 245 T-Top Boat Cover — Custom-Fit for the 24’6″ EdgeWater 245 CC

EdgeWater Power Boats builds its boats in Edgewater, Florida; the company was founded in 1992 by Bob Dougherty, formerly chief designer and head of engineering at Boston Whaler, and molds its hulls with a closed-mold, vacuum-infused process it calls Single Piece Infusion. The 245 CC is EdgeWater’s 24-foot offshore center console, one of its longest-running models: HMY dates it from 2004, and it is still offered to order for 2026. The current factory figures give it 24’6″ overall, an 8’6″ beam and a 21-inch draft, 5,550 lb, 140 gallons of fuel (150 on the 2010 sheet) and up to 400 hp, with single or twin outboards — the 2010 sheet lists a single Yamaha F250 or F350 or twin F150s. Current boats come with a powder-coated fiberglass hardtop with four rod holders, two LED spreader lights and a PFD bag; on earlier boats the top was optional, with an aluminum T-top, a fiberglass hardtop or a sun top, plus radial outriggers. The features a cover has to clear include the walk-in console, a folding seat on the console front, a powder-coated aluminum leaning post with backrest, four rod holders and a cooler (a fiberglass livewell post was also offered), a U-shaped bow lounge over insulated storage, a recessed bow rail, the 28-gallon transom baitwell, a fold-away stern seat and a walk-through transom door. This T-Top cover is patterned for the 245 CC with its hardtop or T-top, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the 245

The cover runs up to the underside of the top and wraps its legs, leaving the roof, rod holders and any outrigger bases exposed. Below, it drapes over the windshield, console and leaning post, spreads forward over the U-shaped bow lounge to the rubrail along the 8’6″ beam, and continues aft over the baitwell and transom door to enclose the outboard — or both outboards on a twin-engine boat — in the same piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the crossover on the same length, see the Edgewater 248 CX T-Top cover; for the 22-footer, the Edgewater 230 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })