Everglades 240 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Everglades 240 Specifications

  • Builder: Everglades Boats, Edgewater, Florida
  • Model Years: About 2007 (BoatTest); no longer built
  • Length Overall: 24'7"
  • Beam: 9'3"
  • Draft: About 1'7" (hull)
  • Weight: About 4,000 lb without power
  • Fuel Capacity: 163 gal
  • Power: Single 225 hp or twin 150–200 hp outboards
  • Deadrise: 21° (transom)
  • Cover Shipping Weight: 34 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: T-top or hardtop frame, console and windshield, leaning-post workstation, cooler seat, bow, transom and single or twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 34 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The Everglades 240 CC, the 24'7" center console on a 9'3" beam from the mid-2000s, with its T-top or hardtop. Tell us your model year when you order so we can confirm the fit.
No. The 243 CC is about the same length but 13 inches narrower, with a different console, seating and hardtop, so it has its own pattern.
Yes. The 240 was sold with a single outboard or twins, and the stern wraps either setup as part of the same cover. Tell us which your boat has when you order.
Our T-Top style is made for any boat with a hard top — an aluminum T-top, a canvas-roofed T-top frame or a fiberglass hardtop. The cover runs up under the top and around its supports, so the roof stays exposed. The 240 came with a powder-coated T-top as standard and a fiberglass hardtop as an option, so tell us which top your boat has when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,200.00  ·  9oz $1,490.00  ·  Sunbrella $1,775.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Everglades 240 T-Top Boat Cover — Custom-Fit for the 24’7″ Everglades 240 CC

Everglades Boats builds in Edgewater, Florida; it was founded in 1997 by Bob Dougherty, the former Boston Whaler designer who had earlier started EdgeWater, and it molds every hull with its patented RAMCAP process, which bonds the fiberglass hull and liner around a pre-molded closed-cell urethane foam core. The 240 CC is Everglades’ wide-beam 24-foot offshore center console from the mid-2000s; BoatTest lists it from 2007 and it is no longer in production. Boating’s test gives it 24’7″ overall, a 9’3″ beam, about 4,000 lb without power and 163 gallons of fuel, on a hull with 21 degrees of deadrise at the transom; power was a single 225 hp Honda as standard or twin 150s, and BoatTest ran one with twin 200s. A powder-coated T-top was standard, with a fiberglass hardtop in gelcoat colors as an option, over an electric windshield that slides down at the push of a button. Under the top, a cover has to clear the console with its electric porcelain head, a leaning-post workstation with a 45-gallon livewell and sink, bolster helm seats on flip-down bases, a 104-quart cooler seat in front of the console, bow cushions over a 129-gallon fishbox, low-profile powder-coated bow rails and an anchor windlass, a folding stern seat and a lockable transom gate. This T-Top cover is patterned for the 240 CC with its T-top or hardtop, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the 240

The cover runs up to the underside of the top and wraps its legs, leaving the roof and any outrigger bases exposed. Below, it drapes over the windshield, console and leaning-post workstation, carries forward over the cooler seat and cushioned bow to the low rails, and falls to the rubrail along the 9’3″ beam — almost nine inches wider than most 24-footers. Aft, it covers the folding stern seat and transom gate and encloses a single outboard or twin outboards in the same piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

240 or 243?

The numbers are close, but the 243 CC is a different boat: a narrower 8’2″ bay-and-offshore hybrid with a standard fiberglass hardtop. The 240 is the wide 9’3″ offshore hull, so each has its own pattern. If your model number reads 243, choose the Everglades 243 T-Top cover.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the later wide-beam 25-footer, see the Everglades 250 T-Top cover.

Sign up for updates and information about our business