Everglades 253 T-Top Boat Cover — Custom-Fit for the 24’9″ Everglades 253 CC
Everglades Boats builds in Edgewater, Florida; it was founded in 1997 by Bob Dougherty, the former Boston Whaler designer who had earlier started EdgeWater, and it molds every hull with its patented RAMCAP process, which bonds the fiberglass hull and liner around a pre-molded closed-cell urethane foam core. The 253 CC is Everglades’ 25-foot hybrid of a bay boat and an offshore deep-V, introduced around 2017 according to HMY, with listings from 2017 through current boats. BoatTest gives it 24’9″ overall, an 8’6″ beam, about 5,250 lb dry, 100 gallons of fuel and a single outboard of up to 300 hp, with 20 degrees of deadrise at the transom, a 16-inch hull draft and 8’6″ of bridge clearance. Its signature is the helm: the standard hardtop mounts on top of the console instead of on side legs, with LED spreader lights, an electronics box, four rod holders, a ski pylon and life-jacket storage, and a curved glass windshield that lowers hydraulically with its own wiper. Around it, a cover has to clear the helm seating, a leaning post in the center of the aft deck with a 26-gallon livewell, a 36-inch console seat on an 86-quart cooler, bow lounges with removable backrests over a 69-gallon fishbox, and jump seats that fold down into a 41-by-76-inch aft casting platform. This T-Top cover is patterned for the 253 CC with its console-mounted hardtop, and like all of our Everglades boat covers, it’s cut to this hull rather than a generic 25-foot size chart.
How It Fits the 253
Because the hardtop is carried by the console itself, the cover runs up under the overhang and closes around the console rather than around separate T-top legs, leaving the roof, electronics box and rod holders exposed. Below, it drapes over the windshield, helm seating and leaning post, spreads forward over the console seat and bow lounges to the rubrail along the 8’6″ beam, and continues aft over the casting platform to enclose the outboard in the same piece. Lower the windshield and take the bow backrests off first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the narrower 24-foot model, see the Everglades 243 T-Top cover; for the wide-beam 25-footer, the Everglades 250 T-Top cover.
