Pair Customs 24 MV T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Pair Customs 24 MV Specifications

  • Hull Length: 24'
  • Length Overall: 27'4" (with bracket)
  • Beam: 8'6"
  • Dry Weight: 4,300 lb
  • Fuel Capacity: 106 gal
  • Deadrise: 14° at transom (modified-V)
  • Draft: About 14"
  • Power: Single outboard on bracket (300–350 hp in listed builds)
  • Livewell: 27 gal
  • Cover Shipping Weight: 37 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the T-top, wraps the frame legs, and covers the console, leaning post, seating, bracket, and outboard; T-top roof stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 37 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

No. It's patterned for the 24 MV, the modified-V (14° deadrise) version. The 24 DV is Pair's deep-V 24 and is a different hull, so please don't order this pattern for a DV.
Yes. The 24 MV measures about 27'4" overall because of its full transom bracket, and the cover is cut to carry over the bracket and wrap the single outboard as part of the same piece.
No. It runs up to the underside of the T-top and wraps around the legs, covering the console, leaning post, forward seating, and rear seats. The T-top roof and its rod holders stay exposed.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is designed for storage only — on a trailer, lift, dry stack, or at the dock. Towing with it installed can damage the cover and voids the warranty, so take it off before you hit the road.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,700.00  ·  9oz $1,925.00  ·  Sunbrella $2,285.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Pair Customs 24 MV T-Top Boat Cover — Custom-Fit for the Pair Customs 24 MV Modified-V Center Console

The Pair Customs 24 MV is the modified-V version of Pair Customs’ 24-foot center console (the builder also offers a deeper 24 DV). Dealer listings for 2025–2026 boats give a 24-foot hull that measures 27’4″ overall with its full transom bracket, an 8’6″ beam, a 4,300 lb dry weight, a 106-gallon fuel tank, a 14° deadrise at the transom and a draft of about 14″. It runs a single outboard on the bracket (listed builds carry a 300 or 350 hp four-stroke). Listed standard equipment includes a large fiberglass T-top (about 6′ x 9′, with five rod holders), a big console with a forward cooler seat and side entry door, forward seating with cushions and backrests, an aluminum leaning post, rear cooler or jump seats and a 27-gallon livewell. This T-Top cover is patterned for the Pair Customs 24 MV with its T-top, and like all of our Pair Customs boat covers, it’s cut to this hull rather than a generic 24-foot size chart.

How It Fits the Pair Customs 24 MV

The cover runs up to the underside of the fiberglass T-top and wraps around its legs, then drapes over the console and its forward cooler seat, the leaning post, and the forward seating down to the gunwales. Aft it covers the rear seats and continues over the bracket and the outboard as one piece, so the whole boat sheds water together; the T-top roof and its rod holders stay exposed. Because the 24 MV carries its engine on a full bracket, the pattern is cut for the extra length behind the transom — something a cover sized to a 24-foot chart would come up short on. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or at the dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the smaller Pair, see the Pair Customs 21 MV T-Top cover, or compare the Regulator 26 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })