Panga Marine 22 Boca Grande T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Panga Marine 22 Boca Grande Specifications

  • Builder: Panga Marine (Sarasota, FL)
  • Length: 22'10" (listed)
  • Beam: 7'
  • Draft: About 8"
  • Dry Weight: About 1,825 lb (listed)
  • Fuel: 49 gal (under deck)
  • Power: Single outboard, 115–150 hp packages
  • Interior: Molded liner
  • Top: Optional T-top or hard top
  • Cover Shipping Weight: 32 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Runs up to the underside of the T-top/hard top, wraps the legs, and covers the console, seating, casting platform, bow and outboard cowling; top stays exposed
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 32 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's made for the Panga Marine 22 Boca Grande — the lined 22, listed at 22'10" with a 7' beam — with a T-top or hard top. Tops, seating and bait stations vary from boat to boat, so please confirm your model year and which top you have when you order so we can check the pattern before we cut.
The builder lists the same 22'10" length and 7' beam for its 22s. The Boca Grande comes with a molded interior liner; the Marquesas has none, which makes it a bit lighter. We cut a separate pattern for each, so order this cover for a Boca Grande and the Panga Marine 22 cover for the other 22s. If you aren't sure, contact us before ordering.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one.
If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,015.00  ·  9oz $1,240.00  ·  Sunbrella $1,500.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Panga Marine 22 Boca Grande T-Top Boat Cover — Custom-Fit for the Panga Marine 22 Boca Grande

Panga Marine builds panga-style fiberglass boats in Sarasota, Florida; its first hulls were built in Guadalajara, Mexico, before the molds moved to Sarasota. Like the working pangas they’re based on, the boats are long and narrow, close to a 4:1 length-to-beam ratio, with a shallow-draft hull and a high bow. The 22 Boca Grande is the lined version of the builder’s 22-foot panga: a molded interior liner gives it a more finished look than the unlined Marquesas built on the same hull. It’s listed at 22’10” with a 7′ beam, and factory spec pages give an 8-inch draft, a 49-gallon tank under the deck in a baffled cell and single outboards from 115 to 150 hp; a later listing gives 1,825 lb dry weight. The hull is all composite with no wood, with hand-laid biaxial fiberglass, a foam-filled hull and Nida-core decks. Standard layout: a center console with a forward casting platform, an insulated bench seat with four rod holders, a Panga bait bench, 10-inch walk-around gunwales, forward storage and an anchor locker over a self-bailing cockpit with two transom scuppers. A T-top with four rod holders was optional, and Boca Grandes on the market also show hard tops. This T-Top cover is patterned for the Panga Marine 22 Boca Grande with its T-top, and like all of our Panga Marine boat covers, it’s cut to this hull rather than a generic 22-foot size chart.

How It Fits the Panga Marine 22 Boca Grande

The cover runs up to the underside of the T-top or hard top and wraps its legs, leaving the roof exposed. Below the top it covers the console and windscreen, the bench seat or leaning post and the lined cockpit, then follows the narrow 7′ beam to the rubrail and rises over the high bow, casting platform and anchor locker. Aft, it covers the bait bench and transom and falls as one loose drape over the outboard cowling, with the lower unit exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the unlined 22, see our Panga Marine 22 T-Top cover, or for the smaller hull, the Panga Marine 20 T-Top cover.

Sign up for updates and information about our business