Panga Marine 22 T-Top Boat Cover — Custom-Fit for Panga Marine’s 22-Foot Panga With a T-Top
Panga Marine of Sarasota, Florida, builds made-to-order fiberglass pangas on deep-V hulls with pronounced reverse chines. Its 22-foot line has included the Marquesas, Captiva and Boca Grande, each listed at 22’10” overall. The Captiva is the most fully documented: a 7’0″ beam, about 10″ of draft, a hull weight of about 1,825 lb, roughly 47–50 gallons of fuel and a 200 hp maximum, with a bait center holding twin 25-gallon wells, a guide console with a front seat, a foredeck with an anchor locker and seating, and a hardtop with an electronics box. The Marquesas shares the 7′ beam with a 49-gallon baffled tank, a 10″ walk-around gunwale and a forward casting platform; an owner on a Florida fishing forum describes his 2005 Marquesas with a center console and T-top. This T-Top cover is patterned for the Panga Marine 22 with its T-top, and like all of our Panga Marine boat covers, it’s cut to this hull rather than a generic 22-foot size chart.
How It Fits the Panga Marine 22
The cover runs up to the underside of the T-top or hardtop and wraps around its legs, then drapes over the console and its front seat, the leaning post or bait center, and the foredeck down to the gunwales, continuing aft over the single outboard as one piece; the top’s roof stays exposed. At about 7′ wide on a 22’10” hull, these pangas are much slimmer than a typical 22-foot center console, so the pattern is cut narrow to keep the sides snug instead of leaving loose fabric to flap and hold water. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or at the dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Check Your Model First
Panga Marine has built several 22-foot pangas, and its older 22 Classic is narrower (about 6’5″) than the 7′-beam Marquesas and Captiva. Before ordering, please confirm your length and beam or send us a photo and your hull ID. If you have the Boca Grande, see that model’s own pattern below.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Own a Boca Grande? See the Panga Marine 22 Boca Grande T-Top cover, or compare the Panga Marine 20 T-Top cover.
