Regulator 23 (1990-2012) T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Regulator 23 (1990-2012) Specifications

  • Length Overall (LOA): 23'4"
  • Beam: 8'4"
  • Dry Weight: ~3,800 lbs
  • Engine: Outboard power, max 400 HP
  • Fuel Capacity: 160 gallons
  • Draft: ~24"
  • Deadrise: 24°
  • Hull Type: Codega-designed Sharp Entry variable deadrise
  • Model Years: c.1994–2013

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
  • Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
  • Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
  • Fit: Custom-fitted to 23'4" Regulator 23 (1990-2012) specifications
  • Protection: UV-resistant, water-repellent, weatherproof

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 33 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

The classic Regulator 23 cover is available in 9oz solution-dyed marine polyester, 7oz solution-dyed polyester, and premium Sunbrella acrylic. All fabrics are solution-dyed — color is baked into every fiber during manufacturing — delivering superior fade resistance even after years of salt air and direct sun exposure typical of Outer Banks and offshore storage.
Yes. This cover is pattern-cut specifically for the classic-generation Regulator 23's T-Top layout. Reinforced cutouts fit precisely around the T-Top support legs, and the fabric wraps the classic Codega hull below the hardtop while leaving the white fiberglass roof fully exposed. The pattern accounts for the original 23's console, leaning post, and cockpit configuration.
Installation takes under 5 minutes solo with no tools required. Drape the cover from bow to stern over the console and T-Top legs, then secure with the hem cord at the rubrail and adjustable tie-down straps with quick-release buckles. The 23'4" length and 8'4" beam make this a manageable one-person job.
No — please remove the cover before towing your Regulator 23 (1990-2012). Our covers are not designed to be trailered: towing with the cover on can cause severe damage to the cover and voids the warranty. The cover is designed for storage only — on a trailer, boat lift, dry stack, or jet dock — and comes off in minutes at the ramp.
Complete barrier over the helm station, GPS/fishfinder displays, rod holders, livewells, leaning post, and all seating surfaces. The cover blocks UV damage, rain, salt spray, bird droppings, and airborne debris while the breathable fabric prevents moisture and mildew buildup underneath — critical for older boats where upholstery preservation matters most.
Your Regulator 23 (1990-2012) cover is backed by our manufacturer's warranty for the original purchaser. Materials and workmanship — stitching, straps, buckles, zippers, and other hardware — are covered for 1 year from the purchase date. Fabric is covered for 3 years on 7oz, 5 years on black or navy 9oz, and 6 years on Sunbrella. Covered defects are repaired or replaced after you contact us for a Return Merchandise Authorization (RMA) number. The warranty does not cover improper use, accident or negligence, unauthorized modifications, improper care, mold or mildew, incorrectly placed orders, theft or loss, or acts of God — and traveling with the cover on or using it in the water voids the warranty. See our Warranty page for full details.
Water-resistant with a DWR (durable water repellent) finish that causes rain to bead and shed. It's also breathable, allowing trapped moisture to escape — this is especially important for classic Regulators that may be stored for extended periods between trips, as it prevents mildew and mold from forming on upholstery and electronics.
This cover fits all Regulator 23 models produced from about 1994 through 2013 with the factory T-Top configuration. The Codega-designed hull dimensions remained consistent across this production run. If you own a 2014 or newer Regulator 23, you need the updated pattern — see the Regulator 23 (2013-Present) cover, as the hull was significantly redesigned.
The Regulator 23 (1990-2012) cover is available in 9oz solution-dyed polyester in Navy or Black, 7oz polyester in Black, or premium Sunbrella acrylic in Marine Blue, Black, or Smoke. Choose your fabric and color in the order options above.
Shipping is a $30 flat rate per cover within the continental United States. Because every cover is custom-made to order, please allow 1–3 weeks for your Regulator 23 (1990-2012) cover to be made and shipped — you'll receive tracking information as soon as it leaves our facility.
Pricing: 7oz $1,050.00  ·  9oz $1,300.00  ·  Sunbrella $1,560.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Regulator 23 T-Top Boat Cover (1990-2012) — Classic Outer Banks Offshore Protection

The original Regulator 23 — produced from about 1994 through 2013 — measures 23’4″ overall with an 8’4″ beam and was the boat that put Regulator Marine on the map. Built in Edenton, North Carolina with the same Lou Codega-designed 24-degree deadrise hull that earned Regulator its legendary reputation for conquering the Outer Banks inlets, this classic center console handles up to 400 horsepower and carries 160 gallons of fuel for serious offshore range. A fitted cover from the center console boat covers collection at Perfect Fit keeps this proven offshore warrior sealed against the elements between trips.

Pattern-Cut for the Classic 23’s Proven Layout

This cover is cut specifically for the classic Regulator 23’s hull dimensions and deck configuration — which differs from the redesigned current model. The fabric wraps the hull below the hardtop with reinforced cutouts around the T-Top legs, while the exposed white fiberglass hardtop roof remains fully visible on top. A hem cord at the rubrail and adjustable tie-down straps lock the cover down. Remove the cover before towing — it’s designed for storage, not travel. Installation takes under five minutes solo. If you own the redesigned version, the Regulator 23 (2013-Present) T-Top boat cover is specifically pattern-cut for the updated hull and deck layout.

Fabric Built for Decades of Offshore Service

The classic Regulator 23 was built to last — many are still running strong after 25+ years on the water. Your cover needs the same longevity. Choose 9oz solution-dyed marine fabric rated for 5-7 years of UV and weather resistance, or step up to premium Sunbrella acrylic for 8-10 years of protection in the harshest salt-air environments. Both options are water-repellent, mildew-resistant, and breathable to prevent trapped moisture from damaging your upholstery and electronics. Double-stitched seams and reinforced stress points handle wind loading in storage. Every cover ships with our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships within 1–3 weeks. Regulator owners exploring the crossover line will find the same precision fit in the Regulator 26 XO T-Top boat cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })