Regulator 26 FS Specifications
- Length Overall (LOA): ~26'
- Beam: ~8'6"
- Dry Weight: ~5,200 lbs
- Engine: Twin outboards, max 500 HP combined
- Fuel Capacity: 176 gallons
- Deadrise: 24°
- Hull Type: Codega-designed Sharp Entry variable deadrise
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to Regulator 26 FS specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 36 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
Yes — this cover is pattern-cut for the Regulator 26 FS's approximately 26-foot hull and 8'6" beam, including the forward-seating bow area, center console, and deep cockpit. The fabric wraps over the bow seats and entire hull below the T-Top hardtop.
The cover is designed for the 26 FS's twin-engine configuration (rated up to 500 HP combined). The fabric extends aft over the transom area while the outboard lower units remain visible below. The pattern accounts for the twin-engine spacing specific to this hull.
Yes. Double-stitched seams and a reinforced hem cord at the rubrail handle highway trailering speeds. At roughly 5,200 pounds dry, the 26 FS is a mid-weight Regulator that trailers frequently, and the adjustable strap-and-buckle tie-downs keep the cover tight during transport.
Absolutely. The cover fully encloses the bow seating area, center console, helm electronics, leaning post, and all cockpit-level components. UV, salt spray, rain, and debris are kept off the upholstery, screens, and gelcoat — extending the life of the interior significantly.
Two options: 9oz solution-dyed marine fabric (5-7 years, in Navy, Black, or Charcoal) and premium Sunbrella acrylic (8-10 years, expanded colors). Both are water-repellent, UV-resistant, and mildew-resistant — built for the demanding Outer Banks salt-air environment the 26 FS was designed to handle.
Yes — the white fiberglass T-Top hardtop roof remains fully exposed. The cover protects everything below the hardtop from bow to transom. T-Top support legs pass through reinforced cutouts in the fabric.
Under five minutes for one person. Drape the cover from bow to stern, align the fitted T-Top leg cutouts, and cinch the strap-and-buckle tie-downs along the rubrail. No tools or second person required.
Water-resistant with a DWR (durable water repellent) finish. The breathable design prevents trapped moisture and mildew from building up underneath — which is critical for protecting gelcoat and upholstery during extended storage in humid coastal climates.
A 2-year manufacturer warranty covers materials and workmanship. The fabric itself lasts 5-7 years (9oz) or 8-10 years (Sunbrella) under normal marine conditions — well beyond the warranty period.
Yes — this cover fits all standard-production Regulator 26 FS models equipped with a factory T-Top. The hull and deck dimensions have been consistent across production years.
Regulator 26 FS T-Top Boat Cover — Classic Codega Forward-Seating Offshore
The Regulator 26 FS measures approximately 26’ overall with an 8’6” beam and roughly 5,200 pounds dry — a forward-seating offshore center console that was one of the boats that defined Regulator Marine’s identity as the builder to trust in the Outer Banks. Designed by naval architect Lou Codega with a 24-degree deadrise Sharp Entry hull and built in Edenton, North Carolina with hand-laid fiberglass, vinylester resin barriers, and composite coring, the 26 FS handles up to 500 horsepower in a twin-engine configuration with 176 gallons of fuel for all-day offshore range. The original Regulator 26 — built by hand by Joan and Owen Maxwell in their first small facility along Core Creek — was the boat that proved the Codega hull could handle Beaufort Inlet and Oregon Inlet on their worst days. The 26 FS carried that legacy forward with bow seating that adds family versatility without compromising the offshore performance that made the name. Browse the full Regulator boat covers collection to protect every model in your fleet.
Pattern-Cut for the 26 FS’s Forward-Seating Layout
This cover is cut specifically for the Regulator 26 FS’s forward-seating bow configuration, center console helm, twin-engine transom, and the Codega hull profile that delivers one of the softest, driest rides in offshore fishing. The fabric wraps the hull below the hardtop with reinforced cutouts around the T-Top support legs, while the white fiberglass hardtop roof stays fully exposed on top. A hem cord at the rubrail and adjustable tie-down straps secure the cover for dock or lift storage. Installation takes under five minutes solo. The next step up in the offshore family is the Regulator 28 FS T-Top boat cover, offering pattern-cut precision for the bigger twin-engine bluewater hull with 219 gallons of fuel.
Codega Legacy, Premium Fabric
The Codega hull on the 26 FS was engineered to take a beating offshore — the 24-degree deadrise entry slices through swells while the variable deadrise aft provides stability at rest and on the drift. Your cover should be equally tough. Choose 9oz solution-dyed marine fabric for 5-7 years of UV and salt resistance, or premium Sunbrella acrylic for 8-10 years of protection in the harshest offshore environments. Both are water-repellent, mildew-resistant, and breathable to prevent trapped moisture damage. Every cover ships with a 2-year manufacturer warranty within 1-2 business days. For the redesigned 23, the Regulator 23 (2013-Present) T-Top boat cover covers the updated Codega hull with its deeper cockpit and modernized deck layout.
Reviews
There are no reviews yet.