Sailfish 2860 Specifications
- Length Overall (LOA): 28'6"
- Beam: 9'6"
- Dry Weight: ~7,500 lbs
- Engine: Twin outboards, up to 600 HP
- Fuel Capacity: 225 gallons
- Draft: ~20"
- Hull Type: Deep-V fiberglass with foam-filled construction and Kevlar reinforcement
- Persons Capacity: 12
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced double-stitched seams, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-patterned to 28'6" Sailfish 2860 hull with 9'6" beam and twin-engine transom
- Protection: UV-resistant, water-repellent, mold and mildew resistant
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 38 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The cover wraps the entire hull below the T-Top hardtop, protecting the center console with dual displays, leaning post with tackle storage, multiple livewells, large insulated fish boxes, gunwale rod racks, bow and stern seating, and all upholstery surfaces. The fiberglass T-Top hardtop stays exposed.
Yes. The cover is custom-patterned for the 2860's twin-engine transom with engines up to 600 HP total. The aft section wraps around both engine cowlings with proper clearance while maintaining a wind-resistant seal. The lower units remain accessible below the cover line.
The 2860 measures 28 feet 6 inches overall with a 9'6" beam, making it one of the largest boats in Sailfish's legacy lineup. At approximately 7,500 pounds dry weight, it's a substantial offshore platform that requires a cover specifically engineered for its wide beam and deep hull profile.
The 2880 is slightly larger at approximately 30 feet with a 10-foot beam and 300 gallons of fuel capacity versus the 2860's 225 gallons. The 2880 also supports higher horsepower at 700 HP max. Both share the same foam-filled, Kevlar-reinforced hull construction philosophy.
The Sailfish 2860 carries 225 gallons of fuel, providing significant offshore range with twin engines. This capacity allows extended bluewater fishing trips, and the cover protects the deck-level fuel fills from rain and salt spray contamination during storage.
For a 28-foot boat stored outdoors, Sunbrella acrylic is strongly recommended. The larger surface area means more UV exposure, and Sunbrella's 8-10 year rating provides the longevity needed to justify the investment in a custom cover for a boat of this size.
The 2860's T-Top frame provides critical structural support for the cover, acting as a center ridgepole that keeps fabric elevated across the boat's nearly 10-foot beam. This peaked profile sheds rainwater to the sides and prevents the dangerous pooling that can stretch or damage universal flat covers.
Yes. The cover fully encloses all livewells, insulated fish boxes, and storage compartments. The water-repellent fabric prevents rain and salt spray from filling these areas during storage, while the breathable construction allows moisture vapor to escape to prevent mold growth.
Yes, though having a helper makes it easier on a 28-foot boat. The T-Top frame supports the cover's center while you secure the hem cord along the rubrails and cinch the tie-down straps. Most owners complete installation in 10-15 minutes once familiar with the process.
Both options carry manufacturer warranties: 5-7 years for the 9oz solution-dyed fabric and 8-10 years for Sunbrella acrylic. The warranty covers material defects, UV degradation, and color fading. Solution-dyed construction means the color is part of the fiber, not a surface treatment.
Sailfish 2860 T-Top Boat Cover
The Sailfish 2860 is a serious offshore center console from Sailfish’s legacy lineup — 28 feet 6 inches of foam-filled, Kevlar-reinforced hull with a 9’6” beam, 225 gallons of fuel, and twin outboard power up to 600 HP. Built in Cairo, Georgia with the same wood-free construction philosophy that defines every Sailfish hull, the 2860 was designed for anglers who run hard offshore and need a platform that can handle rough conditions mile after mile. This custom-fitted T-Top cover protects the entire hull below the hardtop — from the dual-display helm console to the transom livewells — in 9oz solution-dyed marine fabric or premium Sunbrella acrylic.
At nearly 7,500 pounds dry and 9 feet 6 inches wide, the 2860 has a massive amount of surface area exposed to the elements during dock time. The twin-engine transom, multiple livewells, large insulated fish boxes, gunwale rod racks, leaning post with tackle storage, and bow seating all take a beating from UV radiation, salt spray, and weather when left uncovered. This cover is engineered to match the 2860’s substantial dimensions — double-stitched seams handle the stress of covering a 28-foot hull, the hem cord channels into the rubrail for full-perimeter wind resistance, and the T-Top frame supports the fabric across the wide beam to prevent dangerous water pooling.
Built for Bluewater, Protected for the Dock
The 2860 was the predecessor to Sailfish’s current 290 CC, and it delivered the same core promise: a twin-engine platform with the fuel capacity, build quality, and rough-water hull design to reach distant fishing grounds and get back safely. Sailfish’s foam-filled hull with Kevlar reinforcement in high-stress areas provided structural integrity and unsinkable safety, while 225 gallons of fuel gave tournament anglers the range to reach productive bottom and trolling grounds far offshore. This cover preserves that investment with solution-dyed fabric rated for 5-7 years or Sunbrella acrylic rated for 8-10 years of continuous outdoor protection.
Explore the Sailfish Collection
Perfect Fit carries custom covers for every Sailfish model from the compact 188 CC to the flagship 320 CC. Explore our boat shade kits for additional on-water sun protection, or check out the Sailfish 2880 T-Top cover for the largest legacy Sailfish at 30 feet with triple-engine capability. For the current-generation successor to the 2860, see the Sailfish 290 T-Top cover featuring Sailfish’s VDS stepped hull and 600 HP twin-engine power.
Reviews
There are no reviews yet.