Sailfish 320 Specifications
- Length Overall (LOA): 34'0"
- Beam: 10'0"
- Dry Weight: ~10,500 lbs
- Engine: Triple outboards, up to 700 HP total
- Fuel Capacity: 285 gallons
- Draft: ~22"
- Hull Type: Variable Degree Stepped (VDS) — three-zone deadrise (24°/23°/22°)
- Certification: Yacht Certified
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced double-stitched seams, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-patterned to 34'0" Sailfish 320 VDS hull with 10' beam and triple-engine transom
- Protection: UV-resistant, water-repellent, mold and mildew resistant
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 44 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The cover wraps the entire hull below the T-Top hardtop, protecting the center console with full electronics suite, leaning post with rigging station, multiple livewells, large insulated fish boxes, rod storage, bow and aft seating, and all upholstery. The T-Top hardtop remains exposed for ventilation.
Yes. The cover is custom-patterned for the 320's wide transom with engines up to 700 HP total in triple configuration. The aft section provides proper clearance around all three engine cowlings while maintaining a secure seal across the full 10-foot beam transom.
The 320 CC is 34 feet overall with a 10-foot beam and approximately 10,500 pounds dry — the largest boat in the entire Sailfish lineup. With 285 gallons of fuel, triple outboard power up to 700 HP, and Yacht Certification, it's built for serious bluewater fishing.
Yacht Certification means the 320 CC meets the highest standards for structural integrity, safety equipment, and build quality. It reflects the 320's position as Sailfish's flagship — a vessel built to the most rigorous standards for offshore operation.
The 320 carries 285 gallons of fuel — the largest capacity in the current Sailfish lineup. Combined with the VDS hull's fuel efficiency and triple outboard power, this gives the 320 the range for extended offshore trips to distant canyon edges and bluewater fishing grounds.
For the largest boat in the Sailfish lineup, Sunbrella acrylic with 8-10 years of UV protection is essential. The 320's 10-foot beam and 34-foot length create massive surface area exposed to sun, and Sunbrella provides the longevity needed for a cover this size.
Sailfish describes the 320's VDS hull as the softest, driest riding hull in Sailfish history. The three-zone stepped design delivers exceptional ride quality even in rough offshore conditions, while reducing fuel consumption compared to traditional hull designs at this size.
A 34-foot boat cover with a 10-foot beam should be installed by two people. One supports the cover while the other threads the hem cord along the rubrails. The T-Top frame provides central support to prevent sagging. Allow 15-20 minutes for full installation.
Both are Sailfish flagships, but the 320 is larger at 34 feet (vs 30'6"), features the modern VDS stepped hull, updated SailTech construction, and 700 HP triple-engine capability. The 2880 carried more fuel at 300 gallons, but the 320's VDS efficiency compensates.
Both options carry manufacturer warranties: 5-7 years for the 9oz solution-dyed fabric and 8-10 years for Sunbrella acrylic. Covers material defects, UV degradation, and color fading under normal outdoor storage conditions.
Sailfish 320 T-Top Boat Cover
The Sailfish 320 CC is the undisputed flagship of the entire Sailfish lineup — a Yacht Certified 34-foot center console with a commanding 10-foot beam, 285 gallons of fuel, triple outboard power up to 700 HP, and the Variable Degree Stepped (VDS) hull that Sailfish describes as the softest, driest riding hull in their history. Built in Cairo, Georgia with SailTech wood-free construction featuring Kevlar reinforcement and aluminum backing plates, the 320 is engineered for serious bluewater fishing where range, ride quality, and build integrity are non-negotiable. This custom-fitted T-Top cover protects the entire hull below the hardtop in 9oz solution-dyed marine fabric or premium Sunbrella acrylic.
At 10,500 pounds dry with a 10-foot beam and triple-engine transom, the 320 CC is a massive amount of boat that demands a cover engineered specifically for its dimensions. The 285-gallon fuel capacity and 700 HP put distant offshore structure — canyon edges, deepwater wrecks, seamounts — within comfortable range, and boats that fish that far need covers that protect against the constant UV, salt, and weather exposure of coastal storage. Every square foot of the 10-foot beam takes direct sun, from the full electronics suite at the helm to the transom rigging station and rod storage. This cover delivers complete protection with reinforced double-stitched seams, a hem cord perimeter seal, and the T-Top frame acting as a ridgepole across the wide beam.
Yacht Certified Flagship, Maximum Protection
The 320 CC carries Yacht Certification — the highest designation for build quality and safety equipment — reflecting its position as Sailfish’s most capable and most expensive platform. The VDS hull technology that defines the brand delivers its most dramatic benefits at this scale, where the stepped running surfaces reduce drag across 34 feet of hull and the three-zone deadrise provides a ride quality that competitors struggle to match. This cover preserves that flagship investment with solution-dyed fabric rated for 5-7 years or Sunbrella acrylic rated for 8-10 years of outdoor protection.
Explore the Sailfish Collection
Perfect Fit carries custom-patterned covers for every Sailfish model from the compact 188 CC to this 320 CC flagship. Browse our center console boat cover collection across all brands, or compare the Sailfish 2180 T-Top cover for the compact legacy 21-foot center console. For the mid-size VDS sweet spot, see the Sailfish 242 T-Top cover — a 24-foot center console with the widest beam in its class.
Reviews
There are no reviews yet.