7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
36 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the Sea Fox 266 Commander center console with a hard top: the 26-foot hull with a 9'3" beam. It isn't the 268 Commander or the 268 Traveler, which have their own pages, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
Either way, the cover runs over the transom and falls as one loose drape over the outboard cowlings; there are no fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Sea Fox fitted the 266 Commander with its Ultima hard top. Tell us which top your 266 Commander has when you order so we can check it against the pattern.
No. The 266 and 268 Commander share a length, beam and deadrise on paper, but the 268 has its own layout and hard top, so choose this page only if your boat is a 266 Commander.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$1,550.00 · 9oz$1,750.00 · Sunbrella$2,080.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Sea Fox 266 Commander T-Top Boat Cover — Custom-Fit for the Sea Fox 266 Commander Center Console
Sea Fox Boat Company builds its saltwater boats in Moncks Corner, South Carolina. The 266 Commander was a 26-foot center console in the Commander line. Sea Fox lists a 26-foot centerline length, a 9’3″ beam, a 20-degree deadrise and a 16-inch hull draft, with up to 400 hp on single or twin outboards. Published dry weights run from about 4,200 to 4,500 lb and fuel from 143 to 146 gallons, depending on the year. Forward of the console there’s a double-wide lounger over a storage box, with bow cushions and curved backrests in the bow; the console holds a portable toilet and sink. Aft are a 50- to 55-gallon aerated livewell, two in-floor fishboxes, two flip-down jump seats and a folding bench across the transom. Sea Fox’s Ultima hard top appears as an option on earlier sheets and as fitted equipment on later ones, with about 102 inches of bridge clearance. This T-Top cover is patterned for the Sea Fox 266 Commander with its Ultima hard top, and like all of our Sea Fox boat covers, it’s cut to this hull rather than a generic 26-foot size chart.
How It Fits the 266 Commander
The cover runs up to the underside of the hard top and wraps its frame, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post or seat, then runs forward over the console lounger and bow seating to the stem, falling to the rubrail along the 9’3″ beam. Aft, it covers the jump seats, livewell and transom bench and falls as one loose drape over the outboard or outboards, with the lower units exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
266 Commander or 268 Commander?
The 268 Commander shares the 26-foot length, 9’3″ beam and 20-degree deadrise on paper, but it’s a newer boat with its own deck, seating and Aquarium View livewell, so each has its own cover. If you aren’t sure which you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the newer 26-footer, see our Sea Fox 268 Commander T-Top cover; for a 28-foot center console, see the Sea Fox 286 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.