Triton 2200 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Triton 2200 Specifications

  • Builder: Triton Boats (founded 1996 by Earl Bentz)
  • Type: Offshore center console, single outboard
  • Length: 22'
  • Years Built: 1998–2004 (22 Offshore through 2000)
  • Layout: Raised forward casting deck, leaning post, console cooler seat, rear jump seats
  • Livewell: 21 gal stern
  • Power: Single outboard (about 200 hp on the reviewed boat)
  • Cover Shipping Weight: 32 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric, 7oz polyester, or premium Sunbrella acrylic
  • Coverage: Fits up under the T-top and covers the console, leaning post, casting deck, cockpit and transom, draping over the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 32 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Triton 2200 Center Console, the 22-foot boat Triton built from 1998 to 2004, sold as the 22 Offshore in its first years, with a T-top and a single outboard. Please confirm your model and model year when you order so we can check it against the pattern before we cut.
No. The 225 is a different, later hull with its own deck and console, so it has its own pattern. If you aren't sure which you own, check the model name and length on your registration or hull paperwork.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. Tell us which top your 2200 has when you order so we can check it against the pattern.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. The 2200 was built for a single outboard. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $1,015.00  ·  9oz $1,240.00  ·  Sunbrella $1,500.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Triton 2200 T-Top Boat Cover — Custom-Fit for the Triton 2200 Center Console

Earl Bentz founded Triton Boats in 1996 and built its fiberglass boats in Ashland City, Tennessee. Brunswick owned Triton from 2005 to 2010, when it sold the brand to Fishing Holdings, a Platinum Equity affiliate, and fiberglass production moved to Flippin, Arkansas. Alongside its bass boats, Triton built a saltwater line of center consoles and bay boats. The 2200 Center Console was its 22-foot offshore center console; it was built from 1998 to 2004 and was called the 22 Offshore through 2000. The BoatUS-sourced guide on HMY describes a low-cost, fishing-first boat with a raised casting deck forward, an aluminum leaning post with rod holders, a console cooler seat, a walk-in console for storage, rear jump seats, a 21-gallon stern livewell, removable cockpit bolsters, in-deck storage forward and an anchor locker, on a single outboard. This T-Top cover is patterned for the Triton 2200 with its T-top, and like all of our Triton boat covers, it’s cut to this hull rather than a generic 22-foot size chart.

How It Fits the Triton 2200

The cover runs up to the underside of the T-top and wraps its legs, so the roof stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the cooler seat and the raised casting deck to the bow, falling to the rubrail on both sides. Aft, it covers the cockpit and jump seats and falls as one loose drape over the outboard cowling, with the lower unit exposed; tilt the engine down first. Take the cockpit bolsters and loose cushions off before you put it on. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For Triton’s next size up, see our Triton 225 T-Top cover, or for the 24-footer, our Triton 2486 T-Top cover.

Sign up for updates and information about our business