Xplor X18 Center Console Boat Cover & Canvas

Xplor X18 Specifications

  • Builder: Xplor Boatworks, Columbia, SC
  • Years: 2017 to early 2020s
  • Length: About 18 ft 4 in
  • Beam: 84 in (7 ft)
  • Draft: About 6 in
  • Weight: About 700 lbs moderately equipped
  • Power: 50–90 hp outboard
  • Construction: Vacuum-infused vinylester and glass, fully cored
  • Cover Shipping Weight: 25 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full-boat cover; peaks at the console and wraps the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 25 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

They are listed as separate patterns. Xplor's Delta 18 uses the X18 hull but is a streamlined boat with a different console and rigging, so choose the cover that matches your boat — or send us a photo if you're not sure which you have.
Yes. This cover is made for the X18 with its console; it peaks over the console and drapes to the gunwales. If your X18 is a tiller boat with no console, contact us before ordering.
Poling platforms vary by boat and by rigging. Tell us about yours when you order — a photo of the stern helps — and we'll confirm the fit before we cut your cover.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is designed for storage only — on a trailer, lift, rack, or in a garage. Towing with it installed can damage the cover and voids the warranty, so take it off before you hit the road.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $835.00  ·  Sunbrella $985.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Xplor X18 Center Console Boat Cover — Custom-Fit for Xplor Boatworks’ Original 18-Foot Skiff

The X18 is the boat that started Xplor Boatworks — the Columbia, South Carolina builder announced it in 2017 as a shallow-water skiff built with vacuum-infused vinylester and glass and a fully cored hull. It measures about 18’4″ with an 84-inch beam, drafts around 6 inches, weighs roughly 700 lbs moderately equipped, and was set up for outboards in the 50–90 hp range, with tiller or console steering. The X18s we see are typically rigged with a side-entry console and hydraulic steering, a forward casting platform, a poling platform, a large bow storage hatch, an insulated 15-gallon livewell, and front-console and rear-bench cushions. Xplor has since folded the X18 hull into its Delta line, so these covers are made for the original X18 skiffs on the water today. Like all of our Xplor boat covers, this cover is patterned to this hull rather than a generic 18-foot chart.

How It Fits the X18

This is a full-boat cover: it rises to a peak over the console and slopes down to the gunwales so rain runs off, covering the casting deck and bow hatch, the console and cushions, the livewell and cockpit, and wrapping over the outboard at the stern. On a skiff this size it goes on in a few minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, or in a garage or rack — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. Running a different Xplor skiff? See the Xplor X7 center console cover, or the Xplor X18 Delta.

Sign up for updates and information about our business

    } }) } } } }) } } } } })