Edgewater 188 T-Top Boat Cover — Custom-Fit for the 18’8″ EdgeWater 188 CC
EdgeWater Power Boats builds its boats in Edgewater, Florida; the company was founded in 1992 by Bob Dougherty, formerly chief designer and head of engineering at Boston Whaler, and molds its hulls with a closed-mold, vacuum-infused process it calls Single Piece Infusion. The 188 CC is EdgeWater’s long-running 18-foot center console, with listings from 2007 through current 2026 boats. Factory sheets give it 18’8″ overall, a 7’9″ beam and a 13-inch draft; fuel is 54 gallons on the 2010 sheet and 43 on the 2016 and 2020 sheets, and a single outboard of up to 150 hp — the Yamaha F150 on the 2020 sheet, which lists 2,600 lb with the engine. The aluminum T-top is an option on this boat (with four rod holders, two LED spreader lights and an optional instrument box, and 8’4″ of bridge clearance on the 2016 sheet); a sun top was the alternative. Under the top, a cover has to clear the console with its acrylic windshield and grab rail, the leaning post with backrest and rod holders (pedestal seats on 2010 boats), the console cooler seat, a split bow rail, transom quarter seats and a swim platform with ladder. This T-Top cover is patterned for the 188 CC with its optional T-top, and like all of our Edgewater boat covers, it’s cut to this hull rather than a generic 18-foot size chart.
How It Fits the 188
The cover runs up to the underside of the T-top and wraps its four legs, leaving the top and its rod holders exposed. Below, it drapes over the windshield, console and leaning post, carries forward over the split bow rail and bow deck, and falls to the rubrail along the 7’9″ beam. Aft, it covers the quarter seats and swim platform and encloses the outboard in the same piece. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
T-Top or Center Console Cover?
We make two covers for this boat. This T-Top cover is for a 188 fitted with the T-top. If your 188 has no top or only the folding sun top, choose our Edgewater 188 Center Console cover, the full-boat style that peaks over the console; the 188 LE has its own Edgewater 188 LE Center Console cover.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the smaller 18-footer, see the Edgewater 185 T-Top cover; for the next size up, the Edgewater 208 T-Top cover.
