Parker has built tough, no-nonsense saltwater fishing boats in Beaufort, North Carolina since 1972, in a region famous for hand-crafted boat building. Known for deep-vee hulls that handle a chop and an honest, fish-first approach, Parker builds center consoles, pilothouses, sport cabins, and walkarounds prized by serious anglers up and down the coast. Models like the 2400 CC, 2300 DV and 2801 are workhorses built to last. A Parker deserves a cover cut to match — ours are patterned for the Parker center consoles we cover.
T-Tops: 21 SE,21 Gulf Coast, 23 DV, 180 Coastal, 1801, 2100 SE, 2300 DV, 2300 SE, 2400 CC, 2801
Each cover is patterned to a specific Parker center console, tailored around the console, seating and T-top or hardtop so it fits without sagging or pooling water.
Solution-dyed marine fabric stands up to sun, salt, and humidity without fading, keeping your Parker protected season after season.
A water-repellent finish helps rain and spray sheet off instead of pooling, while breathable construction limits trapped moisture and mildew.
Every Parker cover is custom cut and sewn to order in the USA with reinforced seams, secure tie-downs, and a tailored fit.
Parker was founded by the Parker family in 1972 in Beaufort, North Carolina, an area renowned for generations of hand-crafted boat building along the Atlantic. The company started with commercial fishing vessels and skiffs, added sportfishing boats by the late 1970s, and grew its pilothouse and center console lines through the 1980s and 90s as it moved to all-fiberglass construction. In 2019 Parker joined the Correct Craft family as Parker Offshore. Today the lineup spans center consoles like the 2400 CC, 2300 DV and 2801 along with pilothouse, sport cabin, and walkaround models.
A hard-working saltwater boat takes a beating from sun, salt, and rain whenever it isn’t running. UV fades gelcoat and upholstery, rain pools in the cockpit, and salt corrodes hardware. A snug cover shields the console, cabin, deck, and seating on the trailer, up on a lift, or in storage — protecting both condition and resale value on a boat built to last for decades.
A universal cover sits loose, flaps in the wind, and traps moisture against the gelcoat. Our Parker covers are patterned to the Parker models we cover for a tailored fit that sheds water, resists wind, and stays put — so it protects the boat instead of scuffing it.
Parker builds open center consoles, walkarounds, and enclosed pilothouse boats, so two Parkers can need completely different covers. Our covers are made for Parker center consoles: T-Top covers for the 1801, 180 Coastal, 21 SE, 2100 SE, 21 Gulf Coast, 23 DV, 2300 DV, 2300 SE, 2400 CC and 2801, and full Center Console covers for the 1801, 21 SE and 23 SE.
Each cover is crafted from marine-grade, UV-resistant fabric chosen to handle sun, salt, and humidity without fading or cracking. Reinforced stitching, tailored seams, and secure tie-downs keep it snug and quiet on the road, while a water-repellent finish helps rain and spray run off instead of soaking through.
Select your model above to start a custom cover for your Parker center console. Every cover is proudly custom-made in the USA. Not sure of your model, year, or top configuration? Contact us and we’ll help.
We make T-Top covers for the Parker 1801, 180 Coastal, 21 SE, 2100 SE, 21 Gulf Coast, 23 DV, 2300 DV, 2300 SE, 2400 CC and 2801, and full Center Console covers for the Parker 1801, 21 SE and 23 SE.
Our covers are water-resistant and offer effective protection against rain, moisture, and environmental elements. They are designed to keep your boat dry under typical weather conditions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Use our cover selector tool by entering your boat’s make and model to find the best-fitting cover for your Parker vessel.
To keep your boat cover in good condition, regularly brush off loose dirt and rinse with fresh water. For tougher stains, use a mild soap solution and a soft brush, avoiding harsh chemicals to ensure the fabric's durability.
Our covers are made for the Parker center consoles listed above. If you own another Parker, contact us and we’ll check whether one of our patterns fits it.
Possibly. Several of our patterns, such as the 1801, 2100 SE, 2300 DV and 2801, are older Parker models. Tell us your model and year when you order and we’ll confirm the fit.
Not at the moment. Our Parker covers are made for center consoles, either with a T-top or hardtop (T-Top covers) or with no top (Center Console covers). Contact us if you have a pilothouse or walkaround and we’ll let you know if that changes.
Yes — every Parker cover is custom-made in the USA from marine-grade, water-repellent fabric built to handle sun and salt.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.