Our Tidewater boat covers are custom-patterned for each Tidewater model we list, from the 170 Adventure to the 320. Tidewater Boats builds its boats in Lexington, South Carolina. Bay boats, family center consoles and big offshore boats with T-tops and twin outboards each need a cover cut to their own lines, so a generic cover rarely sits right. Every cover is made in the USA from marine-grade, water-repellent fabric.
T-Tops: 180 Adventure, 1800 Bay Max, 1900 SV, 1900, 196, 198, 2000, 210 Adventure, 210 Bay, 210 LXF, 2100 Bay, 2110 Bay Max, 216, 220 Adventure, 220 LXF, 2200, 2210 Carolina Bay, 230 LXF, 2300 Carolina Bay, 232 Adventure, 232 LXF, 2410, 2500, 252 Adventure, 256 LXF, 2700 Carolina Bay, 272 Adventure, 272 LXF, 280, 282 Adventure, 292 Adventure, 302, 3100 Carolina Bay, 320
Center Console: 170 Adventure, 180, 1800 Bay Max, 1900 Bay, 1900, 1910, 198, 210 LXF, 210 SUV, 2110 Bay Max, 220 SUV, 2200 Bay, 2200, 2210 Carolina Bay
Every cover is patterned for a specific Tidewater model, in a T-Top or Center Console style, and tailored around the console, leaning post and seating so it fits without flapping or pooling.
T-Top covers come in 7oz or 9oz marine polyester or Sunbrella. Center Console covers come in 9oz or Sunbrella. All are UV-resistant, water-repellent and breathable.
On the trailer, up on a lift or in storage, your cover shields the helm, electronics and upholstery from UV, rain, dust and bird droppings, keeping your Tidewater ready to fish.
Adjustable tie-downs and a tailored cut make the cover easy to put on and take off, and keep it secure and quiet in a coastal breeze. Proudly custom-made in the USA.
Chris Martin and Jimmy Metts founded Tidewater Boats in 2006, and the company builds its boats in Lexington, South Carolina. Its lineup includes the CC Adventure center consoles, the LXF family models on the same hulls, the Bay Max bay boats and the larger Carolina Bay boats. Older models used four-digit names such as the 1800 Bay Max and 2200 Carolina Bay.
Most of the wear on a boat happens while it sits. UV, salt air, rain and pollen fade gelcoat, stain seating and wear on electronics. A snug, custom cover protects the console, leaning post and rigging between trips, so your Tidewater stays cleaner, drier and ready to fish while it waits on the trailer, the lift or in storage.
A universal cover sits loose, traps moisture and flaps in the wind, chafing gelcoat as it moves. Our Tidewater covers are patterned to the specific model, so they fit snugly, shed water and stay put while the boat is stored.
Many Tidewater models have both cover styles. Choose the T-Top cover if your boat has a T-top or hardtop, or the Center Console cover if it has an open console with no top. On the larger twin-engine models the cover falls as one loose drape over the stern with the lower units exposed.
Each cover is made from marine-grade, UV-resistant fabric chosen to handle sun, salt and humidity. Reinforced stitching, tailored seams and adjustable tie-downs keep it snug and quiet, and a water-repellent finish helps rain run off instead of soaking through.
Pick your model from the list above to order a cover made for your Tidewater. Several Tidewater names are close together, so check the model notes on the product page and contact us if you are unsure. Every cover is custom-made in the USA.
We offer covers for the Tidewater Adventure, LXF, SUV, Bay Max and Carolina Bay models listed above, in T-Top and Center Console styles. If your model is not listed, contact us before ordering.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose the T-Top cover if your Tidewater has a T-top or hardtop; it is cut to fit around the top and its frame. Choose the Center Console cover if your boat has an open console with no top.
Tidewater has used similar names over the years, such as the 1900 and 1900 Bay, or the 272 Adventure and 272 LXF. Check the model notes on the product page and contact us with your model, length and year if you are unsure.
On twin-engine boats the cover falls as one loose drape over the stern and the outboards, with the lower units exposed. Tilt the engines down before installing it.
Our covers are water-repellent and breathable. They shed rain while letting moisture escape, which helps prevent mold and mildew under the cover.
Brush off loose dirt, rinse with fresh water and use a mild soap for tougher spots. Let the cover dry fully before storing it, and avoid harsh chemicals and bleach.
Yes. Every Tidewater cover is custom-made in the USA from marine-grade, water-repellent fabric.
New to ordering? These walk you through it: the Boat Cover Buyer’s Guide (which cover you need and every option explained), the Fabric Guide (7oz vs 9oz vs Sunbrella), and How to Measure if your model isn’t listed. T-Top or open console? See T-Top Covers and Center Console Covers.