Panga Marine 27 T-Top Boat Cover — Custom-Fit for the Panga Marine 27 Center Console
Panga Marine builds panga-style fiberglass boats in Sarasota, Florida; its first hulls were built in Guadalajara, Mexico, before the molds moved to Sarasota. Like the working pangas they’re based on, the boats are long and narrow, close to a 4:1 length-to-beam ratio, with a shallow-draft hull and a high bow. Its lineup has run from 18-foot skiffs up to offshore pangas of 28 and 29 feet with beams around 8’6″, and the 27 sits near the top of that size scale: a nominal 27-foot center console on the same long, narrow, high-bow panga hull, set up with a T-top. On these bigger Panga Marine boats the bow is tall to knock down spray and add buoyancy forward, the console is a custom center console with room for electronics, and the decks are cored to carry a T-top. Seating on the larger pangas is often built to order, so layouts vary from boat to boat. This T-Top cover is patterned for the Panga Marine 27 with its T-top, and like all of our Panga Marine boat covers, it’s cut to this hull rather than a generic 27-foot size chart.
How It Fits the Panga Marine 27
The cover runs up to the underside of the T-top and wraps its legs, so the roof and anything mounted on it stay exposed. Below the top it covers the console, the helm seat or leaning post and any console-front seating, then runs forward over the long foredeck and up the high bow to the stem, falling to the rubrail along both sides. Aft, it covers the cockpit and transom and falls as one loose drape over the outboard cowling, or both cowlings on a twin rig, with the lower units exposed. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Confirm Your 27 Before Ordering
Panga-style boats around 27 feet have been built by several companies, in Mexico and Central America as well as in Florida, and their decks and consoles are not interchangeable. This pattern is for the Panga Marine 27. If your 27-foot panga came from another builder, or you aren’t sure who built it, contact us with your hull ID before ordering.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. See our Panga Marine 22 T-Top cover and Panga Marine 22 Boca Grande T-Top cover for the smaller hulls.
