7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
36 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
It's patterned for the original Regulator 26 center console with twin outboards on a transom bracket: the 25'10" Codega hull with an 8'6" beam. It isn't the 26XO crossover, and the 26 FS has its own page, so please confirm your model and year and which top you have when you order so we can check the pattern before we cut.
Both are built on the same Regulator 26 hull. The FS, short for Forward Seating, adds upholstered bench seats at the bow, so its bow is laid out differently. If your boat has those bow benches, choose the 26 FS cover instead.
The cover runs aft over the transom and the engine bracket and falls as one loose drape over both outboard cowlings; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Yes. Our T-Top covers are made for any hard top, so the cover fits up under the top and wraps its supports either way, leaving the roof exposed. The T-top was a factory option on the 26. Tell us which top your Regulator 26 has when you order so we can check it against the pattern.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, 7oz polyester (Black) for budget-friendly coverage, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz, 5 years on 9oz, and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$1,900.00 · 9oz$2,150.00 · Sunbrella$2,550.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Regulator 26 T-Top Boat Cover — Custom-Fit for the Original Regulator 26 with Bracket
Regulator Marine builds its offshore center consoles in Edenton, North Carolina. The 26 was the company’s first model: a Lou Codega deep-V with a 48-degree bow entry and 24 degrees of deadrise at the transom, and HMY’s guide says more than 1,500 were sold. Sport Fishing lists a 25’10” length, an 8’6″ beam, a 2-foot draft with the engines up and 176 gallons of fuel; twin outboards (twin 250 hp on the spec sheet) ride on an Armstrong dual-engine bracket aft of the transom. The console has a stand-up, fiberglass-lined head compartment with a tilt-away electronics panel, and there’s a leaning post with a backrest, a console cooler seat, a big in-deck rod/storage locker, in-deck fish boxes, and twin bait boxes and a livewell at the transom. A custom T-top was a factory option, and an aft bench that folds down was optional too. This T-Top cover is patterned for the Regulator 26 with its T-top, and like all of our Regulator boat covers, it’s cut to this hull rather than a generic 26-foot size chart.
How It Fits the Regulator 26
The cover runs up to the underside of the T-top and wraps its legs, so the top stays exposed. Below it, the cover takes in the console, windshield and leaning post, then runs forward over the bow, including the 26’s step up at the bow, to the stem, falling to the rubrail along the 8’6″ beam. Aft, it covers the transom bait boxes and falls as one loose drape over the twin outboards on the bracket, with the lower units exposed. If your boat has the folding aft bench, fold it up first. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
26, 26 FS or 26XO?
Regulator also built the 26 FS (Forward Seating) on this same hull with upholstered bow benches, and the much later 26XO is a different, wider single-engine crossover. If you aren’t sure which 26 you own, check the model name on your registration or hull paperwork.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life), a lighter 7oz fabric for budget-friendly coverage, or premium Sunbrella acrylic for 8–10 years of fade resistance. Every option is water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3–6 years on the fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. If your 26 has bow bench seating, see our Regulator 26 FS T-Top cover; for the crossover, see the Regulator 26 XO T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.