Sailfish 290 Specifications
- Length Overall (LOA): 30'6"
- Beam: 9'0"
- Dry Weight: ~8,000 lbs
- Engine: Twin or triple outboards, up to 600 HP total
- Fuel Capacity: 225 gallons
- Hull Type: Variable Degree Stepped (VDS) — three-zone deadrise (24°/23°/22°)
- Construction: SailTech wood-free with Kevlar reinforcement
- Persons Capacity: 12
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced double-stitched seams, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5–7 years); Sunbrella acrylic (8–10 years)
- Fit: Custom-patterned to 30'6" Sailfish 290 VDS hull with twin/triple-engine transom
- Protection: UV-resistant, water-repellent, mold and mildew resistant
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 39 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The cover wraps the entire hull below the T-Top hardtop, protecting the center console with full electronics suite, leaning post with rigging station, multiple livewells, large insulated fish boxes, rod holders, bow and aft seating, and all upholstery. The T-Top hardtop remains exposed.
Yes. The cover is custom-patterned for the 290's transom with engines up to 600 HP total in twin or triple configuration. The aft section provides proper clearance around all engine cowlings while maintaining a secure, wind-resistant seal across the transom.
The 290 CC is 30 feet 6 inches overall with a 9-foot beam and approximately 8,000 pounds dry. With 225 gallons of fuel and twin or triple outboard power up to 600 HP, it's a serious offshore fishing platform built for extended bluewater trips.
The 290 carries 225 gallons of fuel. Combined with the VDS hull's fuel efficiency and up to 600 HP of outboard power, this provides the range for serious offshore runs — 50-plus miles to productive fishing grounds and back with reserve.
Both are 30-foot 6-inch offshore platforms, but the 290 features the modern VDS stepped hull, SailTech construction, and updated electronics integration. The legacy 2880 carried 300 gallons of fuel (vs 225) but the 290's VDS efficiency means comparable range with less fuel.
For a 30-foot offshore boat, Sunbrella acrylic with 8-10 years of UV protection is strongly recommended. The large surface area means significantly more UV exposure than smaller boats, and Sunbrella provides the longevity needed for this size vessel.
The VDS hull's three-zone design gives the 290 a dry, stable ride in rough offshore conditions while maximizing fuel efficiency. The stepped running surfaces reduce drag at speed, and the variable deadrise transitions provide different performance characteristics at different speeds.
A 30-foot boat cover is easiest to install with two people. One supports the cover while the other threads the hem cord along the rubrails. The T-Top frame provides central support. Allow 15-20 minutes for full installation with all straps cinched tight.
Yes. The 290 features a spacious walk-in center console with head compartment and freshwater system. The cover protects the console entry from rain intrusion and keeps the interior dry during storage.
Both options carry manufacturer warranties: 5-7 years for the 9oz solution-dyed fabric and 8-10 years for Sunbrella acrylic. Covers material defects, UV degradation, and color fading under normal outdoor storage conditions.
Sailfish 290 T-Top Boat Cover
The Sailfish 290 CC is the brand’s large offshore flagship — a 30-foot 6-inch center console built on the Variable Degree Stepped (VDS) hull with twin or triple outboard power up to 600 HP, 225 gallons of fuel, and the kind of bluewater capability that puts distant offshore structure within reach. Built in Cairo, Georgia with SailTech wood-free construction featuring Kevlar reinforcement and aluminum backing plates, the 290 carries everything serious offshore anglers need: multiple livewells, large insulated fish boxes, a rigging station, and a spacious console with head compartment and freshwater system. This custom-fitted T-Top cover wraps the entire hull below the hardtop in 9oz solution-dyed marine fabric or premium Sunbrella acrylic.
At 8,000 pounds dry with a 9-foot beam, the 290 CC is a substantial offshore platform that demands a cover engineered specifically for its dimensions. The 225-gallon fuel capacity means the 290 can run 50-plus miles offshore and back — and boats that fish that hard need covers that protect just as thoroughly. The VDS hull’s three-zone design delivers the dry, stable ride that makes long offshore runs comfortable, while the stepped running surfaces maximize fuel efficiency even with triple engines pushing 600 HP. This cover delivers full-perimeter protection with reinforced double-stitched seams, a hem cord perimeter seal, and adjustable tie-down straps that hold through coastal storm conditions.
Bluewater Flagship, Bluewater Protection
The 290 is where Sailfish proves its offshore credentials — a boat built to run far offshore in rough conditions and return loaded with fish. The VDS hull technology that defines the brand delivers measurable advantages in ride quality and fuel efficiency at this scale, while SailTech construction provides the structural integrity for a hull that takes serious punishment offshore. Whether the 290 sits on a dock lift between tournament weekends or stores through the off-season, this cover’s solution-dyed fabric rated for 5-7 years or Sunbrella acrylic rated for 8-10 years keeps every surface protected.
Explore the Sailfish Collection
Perfect Fit carries custom-patterned covers for every Sailfish model from compact bay boats to the largest offshore platforms. Browse our complete T-Top boat cover collection across all brands, or compare the Sailfish 320 T-Top cover for the ultimate 34-foot triple-engine flagship. For a versatile mid-size alternative, check out the Sailfish 240 T-Top cover — a 25-foot center console with 153 gallons of fuel and single or twin-engine capability.
Reviews
There are no reviews yet.