7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight
46 lbs
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
No. Sunbrella isn't offered on the Contender 33 Tournament cover. Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty protection or 7oz polyester (Black) for budget-friendly coverage.
The Contender 33 Tournament center console built from about 2006 to 2010, with its T-top. It is not cut for the 31 or 35.
Yes. Our cover maker lists this pattern as a bracket boat, so the stern is cut long enough to run past the transom over the engine platform and wrap the outboards in one piece. If your boat has an aftermarket bracket, send us photos before ordering.
Yes. The stern section wraps the whole engine package as part of the same cover, so you don't need separate motor covers. Tell us how many engines your boat carries when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz$2,970.00 · 9oz$3,220.00— your final total appears below as you build your cover.
⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat. Questions about fit? Call (561) 677-2628
Contender 33 Tournament T-Top Boat Cover — Custom-Fit for the Stepped-Hull Contender 33 Tournament
Contender Boats was founded in 1984 by Joe Neber and is based in Homestead, Florida, where this boat was built. The 33 Tournament was Contender’s 33-foot center console of 2006 to 2010, according to HMY’s model guide, and it rides on a stepped hull — HMY says Contender chose the steps over the traditional deep-V of its earlier boats for running efficiency — with a little more freeboard than earlier Contenders its size. It carries 400 gallons of fuel and twin or triple outboards — HMY cites twin Yamaha 350s or triple 250s — and listings give it about 33 feet on a 9’8″ beam, with about a 2-foot draft and about 6,600 lb dry. The features a cover has to clear include the T-top, a walk-in console with a marine head and vertical rod holders, a leaning post with a tackle station and aft-facing seat, 42- and 48-gallon transom livewells, four in-deck fish boxes, recessed bow rails, and the integral platform aft that carries the outboards. This T-Top cover is patterned for the 33 Tournament with its T-top, and like all of our Contender boat covers, it’s cut to this hull rather than a generic 33-foot size chart.
How It Fits the 33 Tournament
The cover runs up to the underside of the T-top and wraps its legs, leaving the top exposed. It drapes over the console and leaning post, spreads forward over the open bow to the rubrail along the 9’8″ beam, and continues aft over the transom livewells. Our cover maker cuts this pattern as a bracket boat, so the stern runs past the transom over the engine platform and wraps the outboards in the same piece. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.
Fabric, Warranty & Shipping
Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 31-footer of the same era, see the Contender 31 Tournament T-Top cover; for the next size up, the Contender 35 T-Top cover.
Sign up for updates and information about our business
x
Search
This website uses cookies to improve your experience. We'll assume you're ok with this, but you can opt-out if you wish. ACCEPTREJECT
Privacy & Cookies Policy
Privacy Overview
This website uses cookies to improve your experience while you navigate through the website. Out of these cookies, the cookies that are categorized as necessary are stored on your browser as they are essential for the working of basic functionalities of the website. We also use third-party cookies that help us analyze and understand how you use this website. These cookies will be stored in your browser only with your consent. You also have the option to opt-out of these cookies. But opting out of some of these cookies may have an effect on your browsing experience.
Necessary cookies are absolutely essential for the website to function properly. This category only includes cookies that ensures basic functionalities and security features of the website. These cookies do not store any personal information.
Any cookies that may not be particularly necessary for the website to function and is used specifically to collect user personal data via analytics, ads, other embedded contents are termed as non-necessary cookies. It is mandatory to procure user consent prior to running these cookies on your website.