Contender 35 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Contender 35 Specifications

  • Builder: Contender Boats (Homestead, FL)
  • Versions: 35 ST (stepped) and 35 Tournament (deep-V)
  • Model Years: About 2009 on (HMY)
  • Length Overall: 34'8"–34'10"
  • Beam: About 9'10"–10'
  • Weight: About 13,500 lb with power
  • Fuel Capacity: 400 gal
  • Max Power: 1,200 hp
  • Livewells: Two 40 gal transom, optional 80 gal in-deck
  • Cover Shipping Weight: 50 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: T-top frame, console and leaning post, bow seating, transom and triple outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 50 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

No. Sunbrella isn't offered on the Contender 35 cover. Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty protection or 7oz polyester (Black) for budget-friendly coverage.
The Contender 35 center console sold as the 35 ST and 35 Tournament from about 2009 on, with its T-top or hardtop. Tell us your model year and hull version when you order so we can confirm fit.
No. The 35 Side Console and 35 cuddy are older designs with a different deck. Contact us with photos before ordering if you own one.
Yes. The stern section wraps the whole engine package as part of the same cover, so you don't need separate motor covers. Tell us how many engines your boat carries when you order.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,970.00  ·  9oz $3,220.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Contender 35 T-Top Boat Cover — Custom-Fit for the Triple-Outboard Contender 35 Center Console

Contender Boats was founded in 1984 by Joe Neber and is based in Homestead, Florida, where its larger boats are built. Contender’s 35-foot center console has been sold as the stepped-hull 35 ST — HMY dates it from 2009 — and as the deep-V 35 Tournament; a dealer listing notes the 35 was the first Contender offered with either bottom. Salt Water Sportsman covered the 35 ST in its 2024 buyers guide. Published figures put it at 34’8″ to 34’10” overall on a beam of about 9’10” to 10 feet, with 400 gallons of fuel; Salt Water Sportsman lists 13,500 lb with power and a 1,200 hp rating, and most boats carry triple outboards. The features a cover has to clear include the T-top or hardtop, a console with a lockable head and room for two displays, a leaning post with a tackle center, U-shaped bow seating or a coffin box, two 40-gallon transom livewells with an optional 80-gallon in-deck well, four in-deck fish boxes, a removable stern bench, and a full transom with a door and integral dive platform. This T-Top cover is patterned for the 35 with its T-top, and like all of our Contender boat covers, it’s cut to this hull rather than a generic 35-foot size chart.

How It Fits the 35

The cover runs up to the underside of the top and wraps its legs, leaving the roof exposed. It drapes over the console and leaning post, spreads forward over the bow seating or coffin box to the rubrail, and continues aft over the transom livewells and dive platform to wrap the outboards — usually three — in one piece. Remove the stern bench first. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Which 35 Is This For?

This pattern is listed by our cover maker simply as the Contender 35, and it’s cut for the 35-foot center console sold as the 35 ST and 35 Tournament. Contender’s older 35 Side Console and 35 cuddy are different boats; if you own one of those, contact us before ordering.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For the 33-footer, see the Contender 33 Tournament T-Top cover; for the next size up, the Contender 36 Open T-Top cover or the Contender 39 T-Top cover.

Sign up for updates and information about our business