Sailfish 316 T-Top Boat Cover & Canvas

🇺🇸 Made in the USA ✓ Guaranteed Perfect Fit 🚚 $30 Flat-Rate Shipping 🛡️ Up to 6-Year Fabric Warranty

Sailfish 316 Specifications

  • Builder: Sailfish Boats, Cairo, Georgia
  • Type: Dual console, twin outboards
  • Hull: VDS variable deadrise stepped hull, 22°–24°
  • Length: 30'6" hull; 32'6" rigged
  • Beam: 9'9"
  • Weight: About 8,100–11,315 lb with engines (varies by source)
  • Fuel: 265 gal
  • Draft: 22" (hull)
  • Top: Fiberglass hardtop, full-height windshield
  • Cover Shipping Weight: 44 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or 7oz polyester
  • Coverage: Fits up under the hardtop and covers the windshield, both consoles, bow lounges, cockpit seating and transom, draping over the twin outboards
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 44 lbs

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Sailfish 316 DC dual console: the 30'6" hull with a 9'9" beam, a fiberglass hardtop and twin outboards. Please confirm your model and year when you order so we can check the pattern before we cut.
T-Top is the name of our cover style for any boat with a hard top. Our T-Top covers fit any hard top, so the cover fits up under the 316's hardtop and wraps its supports, leaving the roof exposed. If your top has been changed or added to, tell us when you order.
The cover runs aft over the transom and falls as one loose drape over both outboard cowlings; there are no separate fitted engine pockets, and the lower units stay exposed below the hem. Tilt the engines down so the fabric hangs evenly.
Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn't made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or 7oz polyester (Black) for budget-friendly coverage. Solution-dyed fabric has the color built into the fiber, so it resists fading and won't bleed onto gelcoat or cushions.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (3 years on 7oz and 5 years on 9oz). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 7oz $2,860.00  ·  9oz $3,100.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Key West Style Top is not exclusive to Key West Boats.

    Aft Support Bars

    Does your t-top have aft support bars?

    Jet Dock Storage

    Our Covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you're agreeing to modify your cover further if the fit at the motors isn't as desired.

     

    In Water Storage

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty. We recommend our Center Console Curtain as a solution for In Water Storage.

     

    Motor Option

    Bow Option

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    *I will remove trolling motor selection will be filled

    Additional Option

    JACK PLATE
     
     

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form 

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Sailfish 316 T-Top Boat Cover — Custom-Fit for the Sailfish 316 DC Dual Console

Sailfish Boats builds its center and dual consoles at its plant in Cairo, Georgia. The 316 DC is a dual console family fishing boat and, when it came out, Sailfish’s largest dual console yet. Sailfish lists a 30’6″ hull, 32’6″ rigged, a 9’9″ beam, 265 gallons of fuel, a 22″ draft and 22 to 24 degrees of deadrise on its VDS stepped hull; twin Mercury, Yamaha or Suzuki outboards are offered. Weight varies by source: about 8,100 lb with engines in Sport Fishing’s report, while the current factory sheet gives about 11,315 lb rigged. A fiberglass hardtop with rocket launchers and lights is standard over a full-height tempered-glass windshield with a sliding center panel to the bow. Up front are chaise lounge seats with fold-down armrests, a bow cooler and insulated fish boxes; the starboard helm console faces a port console with a companion seat and an enclosed head. Aft are rear-facing seats, a folding aft seat, a 30-gallon transom baitwell, in-floor fish boxes, a port dive door with ladder and a walk-through transom door. A trolling motor is an option. This T-Top cover is patterned for the Sailfish 316 DC with its hardtop, and like all of our Sailfish boat covers, it’s cut to this hull rather than a generic 31-foot size chart.

How It Fits the Sailfish 316

The cover runs up to the underside of the hardtop and wraps its supports, so the roof stays exposed. Below it, the cover takes in the windshield and both consoles, then runs forward over the bow lounges to the stem, falling to the rubrail along the 9’9″ beam. Aft, it covers the helm seats, rear-facing seats and transom and falls as one loose drape over the twin outboards, with the lower units exposed. Remove the bow table and cushions first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. On a boat this size, installing is easiest with two people: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or a lighter 7oz fabric for budget-friendly coverage. Both options are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 3 years on 7oz and 5 years on 9oz fabric) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For a smaller Sailfish dual console, see our Sailfish 276 DC T-Top cover; for a center console of similar size, see the Sailfish 320 T-Top cover.

Sign up for updates and information about our business

    } }) } } } }) } } } } })