Xplor 24 (X) Specifications
- Length Overall (LOA): 24'8"
- Beam: 8'0"
- Dry Weight: ~3,500 lbs
- Engine: Single outboard, 400 HP max
- Fuel Capacity: 80 gallons
- Draft: ~13"
- Hull Type: 15° deadrise vacuum-infused fiberglass center console
Cover Features
- Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
- Coverage Type: T-Top cover wraps hull below hardtop; hardtop remains exposed
- Construction: Reinforced stitching, hem cord at rubrail, adjustable tie-down straps
- Durability: Solution-dyed fabric (5-7 years); Sunbrella acrylic (8-10 years)
- Fit: Custom-fitted to 24'8" Xplor 24 (X) specifications
- Protection: UV-resistant, water-repellent, weatherproof
Additional information
Choose Your Cover Fabric
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.
9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.
Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.
Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.
*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
| Weight | 34 lbs |
|---|
Install
Please watch the video below for installation instructions!
No more offers for this product!
Frequently Asked Questions
The Xplor 24 (X) T-Top cover is available in 9oz solution-dyed marine fabric for reliable 5-7 year protection, or premium Sunbrella acrylic for 8-10 years of UV and weather resistance. A lighter 7oz option is also available. All fabrics are solution-dyed through the fiber for colorfastness and long-term durability.
Yes. The Xplor 24 (X) T-Top cover is pattern-cut with reinforced cutouts that wrap around the T-Top support legs. The cover drapes from the hardtop frame down to the rubrail, leaving the hardtop roof exposed on top while fully enclosing the hull, console, and cockpit below.
Installation takes one person under five minutes. Drape the cover over the bow, align the T-Top cutouts around the support legs, pull the fabric aft past the console and leaning post, then secure the adjustable strap-and-buckle tie-downs along the gunwale. No tools required.
Yes. The Xplor 24 (X) T-Top cover features reinforced stitching and a hem cord system designed for highway-speed trailering. The adjustable straps hold the cover tight against the hull at speed, preventing billowing or flapping during transport.
Absolutely. The Xplor 24 (X) T-Top cover creates a complete barrier over the helm console, fishfinder, GPS, VHF radio, leaning post cushions, and all cockpit upholstery. The water-repellent fabric blocks UV rays, rain, salt spray, and airborne debris that cause fading and deterioration.
Every Xplor 24 (X) T-Top cover includes a 2-year manufacturer warranty covering defects in materials and workmanship. The solution-dyed fabrics are engineered for 5-7 years of service life, and the Sunbrella option extends that to 8-10 years under normal conditions.
The Xplor 24 (X) T-Top cover is water-resistant with a DWR (durable water repellent) finish that causes rain and spray to bead and roll off the fabric surface. The cover is also breathable, allowing trapped moisture and condensation to escape rather than pooling underneath — which prevents mildew growth.
Yes. This cover is designed to fit all standard production years of the Xplor 24 (X) equipped with a factory T-Top. Since the X24's hull dimensions and T-Top mounting points have remained consistent across production runs, the cover fits all model years without modification.
The 9oz solution-dyed marine fabric is available in Navy, Black, and Charcoal. The premium Sunbrella acrylic line offers an expanded selection of colors. All colors are solution-dyed through the fiber for lasting colorfastness that won't fade, even in harsh saltwater sun.
Shipping is a flat rate per cover for delivery anywhere in the continental United States. Orders typically ship within 1-2 business days and arrive via standard ground carrier.
Xplor 24 (X) T-Top Boat Cover — Boutique Bay-to-Offshore Protection
The Xplor 24 (X) — also known as the X24 Andros — is a 24’8″ center console with an 8’0″ beam, weighing approximately 3,500 pounds and rated for up to 400 horsepower on the transom. Built by Xplor Boatworks, a boutique builder out of South Carolina specializing in vacuum-infused hulls, the X24 is designed as a bay-to-offshore crossover that handles inshore flats and open-water runs with equal confidence. A 15-degree deadrise hull offers a balance between shallow-water stability and chop-cutting performance, while an 80-gallon fuel tank and a 13-inch draft give anglers access to both skinny water and extended offshore range. This custom-fitted T-Top cover from Perfect Fit Boat Covers wraps the entire hull below the hardtop, shielding the Xplor 24’s helm station, cockpit layout, and vacuum-infused gelcoat finish from UV, salt air, and weather exposure between trips.
Tailored to the X24’s Crossover Deck Layout
The Xplor 24 (X) features a center console with a forward-facing leaning post, flush-mount rod holders, a large bow casting platform, integrated fishboxes, and a livewell — all components designed for serious inshore and nearshore fishing. This cover is pattern-cut to account for the T-Top support legs, the console profile, and the transom-mounted outboard, draping smoothly from the hardtop frame to the rubrail with adjustable strap-and-buckle tie-downs at the gunwale. Installation takes one person under five minutes, and the reinforced construction is rated for highway-speed trailering. Anglers covering a similar 24-foot T-Top platform will find the same trailerable fit quality in the Pair Customs 24 T-Top cover.
Protection That Matches Xplor’s Vacuum-Infused Quality
Fabric options include 9oz solution-dyed marine fabric rated for five to seven years of UV and weather resistance, or premium Sunbrella acrylic that extends coverage life to eight to ten years. Both fabrics are water-repellent, mildew-resistant, and breathable to prevent trapped moisture beneath the cover. Every seam is double-stitched for long-term durability, and a hem cord at the rubrail ensures a snug, wind-resistant fit. This cover ships with a 2-year manufacturer warranty and pairs well with other mid-range fishing platforms like the Sea Hunt 234 Ultra T-Top cover for anglers running multiple boats.
Reviews
There are no reviews yet.