Xplor X7 Center Console Boat Cover & Canvas

Xplor X7 Specifications

  • Builder: Xplor Boatworks, Columbia, South Carolina
  • Hull: Infused vinyl ester/carbon, fully cored
  • Type: Flats skiff, side-entry console
  • Length: 18'9"
  • Beam: 88"
  • Deadrise: 7°
  • Dry Weight: About 650 lb
  • Draft: 6–7"
  • Fuel: About 28 gal
  • Power: Single outboard, up to 115 hp
  • Cover Shipping Weight: 25 lbs

Cover Features

  • Fabric Options: 9oz solution-dyed marine fabric or premium Sunbrella acrylic
  • Coverage: Full cover from bow to stern and rubrail to rubrail, peaking over the console and draping over the outboard
  • Construction: Reinforced stitching, hem cord at the rubrail, adjustable tie-down straps
  • Protection: UV-resistant, water-repellent, breathable

Description

Additional information

Choose Your Cover Fabric

7 oz. Polyester — Our entry-level marine cover fabric, woven from 100% polyester fiber at a 7 oz. per linear yard weight. This lighter option keeps the cover manageable for solo handling while still delivering reliable protection against sun, rain, and debris. Backed by a 3-year fabric warranty. Ships in Black.

9 oz. Polyester — Step up to our heavy-duty polyester, engineered at 9 oz. per linear yard for boats that face tougher conditions or extended outdoor storage. The denser weave adds an extra layer of defense against abrasion and weather without adding unnecessary bulk. Protected by a 5-year fabric warranty. Ships in Navy or Black.

Sunbrella® — For boaters who want the best, our Sunbrella covers use 100% solution-dyed acrylic — the same fabric trusted by marine professionals worldwide. Naturally resistant to fading, mold, and water damage, Sunbrella holds its color and integrity season after season. Covered by a 6-year fabric warranty. Ships in Black, Smoke, or Marine Blue.

Both polyester options feature solution-dyed construction, where pigment is infused into each fiber during production rather than applied to the surface afterward. This process locks color deep into the material, preventing any dye transfer to your boat’s gel coat or finish. The result is a cover that stays vibrant without bleeding or rubbing off. Our polyester is also designed to breathe — it allows moisture trapped underneath to vent out naturally, reducing the risk of mildew and keeping your boat dry. The fabric holds its form without sagging or stretching over time, stays lightweight enough for one person to handle, and stands up to prolonged UV exposure and harsh marine weather.

*The warranty periods above are provided by the fabric manufacturer and cover the material itself. For details on what’s included in the warranty for your completed cover, please see our warranty page.
Weight 25 lbs
Fabric

9oz Polyester

Install

Please watch the video below for installation instructions!
No more offers for this product!

Frequently Asked Questions

It's patterned for the Xplor x7, the 18'9" flats skiff with an 88-inch beam, a 7-degree deadrise and a side-entry console. Xplor's x13 is the same length and beam but has a deeper 13-degree hull, and the x18 is narrower, so please confirm your model when you order; if you aren't sure, check the model name on your registration or hull paperwork.
Xplor offers an insulated 15-gallon livewell seat as an add-on to the x7 console. The cover peaks over the console either way, but tell us if your boat has the seat when you order so we can check it against the pattern.
Xplor lists a poling platform and a forward casting platform as x7 options. Platforms and push-pole holders vary from boat to boat, so tell us when you order whether yours has a poling platform, a forward casting platform or push-pole holders, and we'll check them against the pattern before we cut. Take the push pole off first.
The cover runs aft over the transom and falls as one loose drape over the outboard cowling; there's no fitted engine pocket, and the lower unit stays exposed below the hem. Xplor rates the x7 for up to 115 hp, and many are rigged on a jack plate. Tilt the engine down so the fabric hangs evenly.
Choose 9oz solution-dyed polyester (Navy or Black) for heavy-duty everyday protection, or premium Sunbrella acrylic (Marine Blue, Black, or Smoke) for maximum UV resistance and longevity.
No. The cover is made to protect your boat while it is parked on its trailer, up on a lift or in storage. Take it off before you tow: trailering with the cover on can damage it and voids the warranty.
Materials and workmanship are covered for 1 year, and the fabric carries its own warranty (5 years on 9oz and 6 years on Sunbrella). Every cover is made to order, so please allow 1–3 weeks; shipping is a $30 flat rate within the continental US.
Pricing: 9oz $835.00  ·  Sunbrella $985.00 — your final total appears below as you build your cover.
  • *Materials

    *Fabric & Colors

    *Fabric & Colors

  • Cover Option

    Boat Option

    You have selected "Sea Pen" as your storage option. Please call our office at 843-760-6101 to place your order.

    Our covers are not designed for In Water use. Selecting this option is acknowledging that you will have to take the cover to a local canvas shop for modification and will void your warranty.

    Our covers are designed to fit best with the motors trimmed down. By choosing Jet Dock as a storage option, you are agreeing to modify your cover further if the fit at the motors isn't as desired.

    Motor Option

    Bow Option

    test

    A re-powered motor means the motor has been upgraded or there has been a change in the motor style from the original factory motor

    There is a variety of different style trolling motors. For this reason, trolling motor patterns are not available. You must remove trolling motor for cover to fit.

    Additional Option

    You have selected Powerpoles as an option. Measurements are needed in order to process your order. Please click the link below, fill in the measurements and send back to info@perfectfitboatcovers.com in order to fully process your order. Please include your name in the subject line. Power Pole Measurement Form

⏱️ Current lead time: 1–3 weeks — every cover is custom-made for your boat.
Questions about fit? Call (561) 677-2628

Xplor X7 Center Console Boat Cover — Custom-Fit for the Xplor x7 Flats Skiff

Xplor Boatworks builds fiberglass skiffs and bay boats by hand in Columbia, South Carolina. Owner Frankie Marion built the first one as an expedition skiff for a film project in the Louisiana Delta, and the boats are infused vinyl ester laminates with fully cored construction. The x7 takes its name from its 7-degree deadrise, and Xplor built it for more speed while still getting skinny, with an engineered bottom and a carbon layup. Xplor lists it at 18’9″ overall with an 88-inch beam, about 650 lb dry, a 6- to 7-inch draft depending on the engine, about 28 gallons of fuel and power up to 115 hp. It has a side-entry console with storage underneath, large bow storage, two 33-gallon rear boxes (the port one a plumbed release well), a 28-gallon round livewell in the stern and an under-seat box. This Center Console cover is patterned for the Xplor x7 with its side-entry console, and like all of our Xplor boat covers, it’s cut to this hull rather than a generic 19-foot size chart.

How It Fits the Xplor x7

This is a full cover for the whole skiff. It peaks over the console, then slopes down to the gunwales in every direction, running bow to stern and rubrail to rubrail over the bow storage hatch, the console and the rear boxes and livewell. At the stern it falls as one loose drape over the outboard cowling, with the lower unit exposed below the hem; tilt the engine down first. Take off any seat or console cushions first. Remove your trolling motor before installing the cover. Trolling motors come in too many styles to pattern around, so the cover isn’t made to go over one. If your boat has Power-Poles, select them in the Power Poles field when you order. A Power Pole Measurement Form will pop up; fill it in and email it to info@perfectfitboatcovers.com so we can cut the cover to fit around them. Installation takes about five minutes: drape it bow to stern, run the hem cord along the rubrail, and cinch the adjustable strap-and-buckle tie-downs. It’s made for storage on a trailer, lift, dry stack, or jet dock — take it off before towing, since trailering with the cover on can damage it and voids the warranty.

Fabric, Warranty & Shipping

Choose 9oz solution-dyed marine fabric for heavy-duty everyday protection (5–7 year service life) or premium Sunbrella acrylic for 8–10 years of fade resistance. Both are water-repellent, breathable, mildew-resistant, and double-stitched at the seams. Each cover is backed by our warranty (1 year on materials and workmanship, plus 5 years on 9oz and 6 years on Sunbrella) and ships for a $30 flat rate within the US — every cover is made to order, so please allow 1–3 weeks. For Xplor’s original skiff, see our Xplor X18 Center Console cover, or for its 24-footer, our Xplor 24 X T-Top cover.

Sign up for updates and information about our business